Rumors of a new General Chem Pump coming

D Luke

Supportive Member
Joined
Apr 12, 2015
Messages
1,018
Location
MI
Name
Derek
I need to rebuild my Chem pump on my 1200 SE at 800 hours. That's one thing I've never personally done before.

Do I just need the disc and diaphragm? Is there a kit? O-rings? Check valves?
 

dealtimeman

Everyday is Saturday.
Joined
Sep 20, 2008
Messages
10,878
Location
Fort Worth , Texas
Name
Michael
How often should those little pumps be rebuilt?


Depends on if you or your guys don't uses the shutoff operating at greater than 8-1300 psi as those are the pressure ranges at which the diaphragm is just taking a beating. As the diaphragm is the material that is pulsing to pump or inject the juice into the steam

They over came it by using the spring.
 

Dennis99

Member
Joined
Mar 25, 2009
Messages
17
Location
Gorleston, Norfolk, UK
Name
Dennis
Recently changed the diaphragm in mine, easy to do job.



If the chem pump doesn't prime after a rebuild, start your machine, put the prime pipe (the one without the filter) in your vac slot, cup your hand around to get a forced prime.
 

Wandslinger

Member
Joined
Oct 7, 2006
Messages
1,006
Location
Simi Valley
Name
Tom Meyer
Just rebuilt mine at 760...easy peasy. I need to put a shut off valve between the pump and the chemical pump. That should extend the life. SS recommends a rebuild every 500 hours.
 

Latest posts

Back
Top Bottom