Saiger and I just finished 104,000 sq ft of VLM cleaning……

Lc17smp

Member
Joined
Nov 22, 2019
Messages
48
Location
Dallas
Name
Larry Cole
104,000 sq ft that included 15 four story stairs. 8 total days but had 1.5 days off to fit in a few other customers. (6.5 days on the job) My first VLM job. Mark never did show up but his 2x Oxy encap sure did. Stuff worked great. Went thru probably 9 gallons. It was my oldest son an I for 90% of the job. That’s a lot of work. But I’m now ready to VLM full time. Way more profitable. They are pleased with the results and booked 3 more units all almost the exact same size. Only 320,000 sq ft to go. Thanks for the info in my prior post to get me going. I did watch a lot of Mark’s videos before I started.

IMG_0758.jpeg
 
Last edited:

Cleanworks

Moderator
Joined
Oct 22, 2012
Messages
27,781
Location
New Westminster,BC
Name
Ron Marriott
104,000 sq ft that included 15 four story stairs. 8 total days but had 1.5 days off to fit in a few other customers. (6.5 days on the job) My first VLM job. Mark never did show up but his 2x Oxy encap sure did. Stuff worked great. Went thru probably 9 gallons. It was my oldest son an I for 90% of the job. That’s a lot of work. But I’m now ready to VLM full time. Way more profitable. They are pleased with the results and booked 3 more units all almost the exact same size. Only 320,000 sq ft to go. Thanks for the info in my prior post to get me going. I did watch a lot of Mark’s videos before I started.

View attachment 129901
We're you using the Saiger Blue or the Red?
 
Joined
Jun 20, 2016
Messages
6,491
Location
Bc
Name
Jeff T
VLM allows a guy to reach any job. The sky is the limit when someone understands the process and concept.
We did 2 jobs over the last weekend. Both commercial, both VLM. Neither one was accessible by TM. I sure as heck didn’t want to porty them, as the soil load didn’t warrant it.
Used properly, it’s a viable way to maintain commercial carpeting…
Just remember, vacuuming is an essential part of the process.
 

Lc17smp

Member
Joined
Nov 22, 2019
Messages
48
Location
Dallas
Name
Larry Cole
I underestimated the amount of time vacuuming would take. Fortunately they had a ride on vacuum and a large area vacuum. Each of the facilities I’m cleaning do. I will need to buy myself a large area vacuum vacuum soon if I’m going to continue this.

Any recommendations on one with baseboard brush? The ride on had one and it’s very helpful.
 
Joined
Oct 25, 2016
Messages
3,097
Location
Montana
Name
Swani
We are doing a job that is 3 buildings and 11k sq ft total. I was using Encapuclean Green DS. I love Encapuclean DS because of it's near neutral ph and it has always performed great for me on upholstery, so I always keep it on hand for tough upholstery jobs.

However, I ran out near the end and didn't want to run back to shop to get another gallon, so I grabbed Saiger's Double Strength Encap that I had in the van. I was very impressed at how well it cut through the soil. Even the well trafficked entrance was no problem.

I'm not throwing out my trusted Encapuclean any time soon, but Saiger's has my attention for this type of cleaning.
 

Cleanworks

Moderator
Joined
Oct 22, 2012
Messages
27,781
Location
New Westminster,BC
Name
Ron Marriott
We are doing a job that is 3 buildings and 11k sq ft total. I was using Encapuclean Green DS. I love Encapuclean DS because of it's near neutral ph and it has always performed great for me on upholstery, so I always keep it on hand for tough upholstery jobs.

However, I ran out near the end and didn't want to run back to shop to get another gallon, so I grabbed Saiger's Double Strength Encap that I had in the van. I was very impressed at how well it cut through the soil. Even the well trafficked entrance was no problem.

I'm not throwing out my trusted Encapuclean any time soon, but Saiger's has my attention for this type of cleaning.
I've used the Encapuclean and it does work well. I prefer Saiger's products. In my opinion it seems to have an edge. Both products do work well though.
 
  • Like
Reactions: Living The Dream

Rick J

Member
Joined
Jan 9, 2016
Messages
921
Location
Ohio
Name
rick Jones
104,000 sq ft that included 15 four story stairs. 8 total days but had 1.5 days off to fit in a few other customers. (6.5 days on the job) My first VLM job. Mark never did show up but his 2x Oxy encap sure did. Stuff worked great. Went thru probably 9 gallons. It was my oldest son an I for 90% of the job. That’s a lot of work. But I’m now ready to VLM full time. Way more profitable. They are pleased with the results and booked 3 more units all almost the exact same size. Only 320,000 sq ft to go. Thanks for the info in my prior post to get me going. I did watch a lot of Mark’s videos before I started.

View attachment 129902
pads, or absorbent bonnets?
 
Joined
Mar 29, 2008
Messages
9,541
Location
Hawaii
Name
Nate W.
I use a 28 inch Betco battery sweeper, vacuum. I pull a trailer!!! Of course with other vacuums. No time to waste.

I want a Windsor ivac 24" ride-on.. Once I saw how fast they could vacuum hallways in a hotel, it was game over.. 🍻

I have 3 28" vacuums, but hardly ever use them.. I'm a rugfag more than a CC.. :shifty:
 

Kenny Hayes

Member
Joined
Apr 17, 2009
Messages
9,109
Location
Yukon, Oklahoma
Name
Kenny Hayes
I use them in my school hallways. Or, after events and receptions at my churches. They gobble up nearly everything. They’re not perfect, nothing is. We use it all, uprights, backpacks, but not a rider sweeper. Rider scrubbers, yes!
 
Joined
Mar 29, 2008
Messages
9,541
Location
Hawaii
Name
Nate W.
I use them in my school hallways. Or, after events and receptions at my churches. They gobble up nearly everything. They’re not perfect, nothing is. We use it all, uprights, backpacks, but not a rider sweeper. Rider scrubbers, yes!

Not perfect but effectively ran, 5mins per hall with a counter rotating brush will pull more out with less passes, and time is money.. Granted that's with up kept carpets, trashed is what it is.. Still the thought of being able to go over it multiple times in the same amount of time has my vote.. Hallways, ballrooms, big offices..

And no, not over a rug.. I air dust, tumble dust, badger, vacuum a rug.. 220-221 what ever it takes.. :lol:
 
  • Haha
Reactions: Kenny Hayes
Joined
Mar 29, 2008
Messages
9,541
Location
Hawaii
Name
Nate W.
I'd box truck it with a liftgate over a trailer anyday.. Hell, even ramps over a trailer.. :winky:

I know you miss Chavez, I do as well.. I told him to come back on, fooker left me on read! Crickets.. :lol:
 

Lc17smp

Member
Joined
Nov 22, 2019
Messages
48
Location
Dallas
Name
Larry Cole
Well I finished up all the buildings on Saturday. It was 2 more not 3. Total of 318,000 sq ft. The last 2 took 6 days each. 65-70 hours a week. Ain’t gonna lie, the hours were tough. They were very happy with the results. The last one I did was cleaned by a large company with lots of portys 4 months prior. The head janitor was telling me how impressed they were with the other company when they showed up. Lots of people, equipment, etc. They soaked the carpet and left. As it dried many of the spots were returning. They couldn’t believe how my little machine and all those pads could do such a good job. I bought a Ridgid 6” orbital sander to use with 8” microfiber pads on the 93 flights of stairs I had to clean. Worked very well. I learned a lot and should be able to streamline things a little on the next big job. I do enjoy the big jobs and will now be doing my best to land large jobs that I thought were out of my league. I think these 3 jobs may have single handedly turned my 18 y/o son into a man. He ran himself into the ground trying to keep up with his 47 y/o dad. Let’s say he won’t be talking trash about my age for a while. 😂
 

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
115,562
Location
The High Chapperal
Well I finished up all the buildings on Saturday. It was 2 more not 3. Total of 318,000 sq ft. The last 2 took 6 days each. 65-70 hours a week. Ain’t gonna lie, the hours were tough. They were very happy with the results. The last one I did was cleaned by a large company with lots of portys 4 months prior. The head janitor was telling me how impressed they were with the other company when they showed up. Lots of people, equipment, etc. They soaked the carpet and left. As it dried many of the spots were returning. They couldn’t believe how my little machine and all those pads could do such a good job. I bought a Ridgid 6” orbital sander to use with 8” microfiber pads on the 93 flights of stairs I had to clean. Worked very well. I learned a lot and should be able to streamline things a little on the next big job. I do enjoy the big jobs and will now be doing my best to land large jobs that I thought were out of my league. I think these 3 jobs may have single handedly turned my 18 y/o son into a man. He ran himself into the ground trying to keep up with his 47 y/o dad. Let’s say he won’t be talking trash about my age for a while. 😂



would you do it all over again, and what would you do differently?
 

Latest posts

Back
Top Bottom