Sealer on non-porous materials.

Luky

Member
Joined
Jan 19, 2023
Messages
319
Location
Chicagoland
Name
Mario
I do not intend to apply sealer on ceramic tiles, LVT, or laminate, and I advise against it.
I refused to take on a job to remove the flaking sealer from said materials until yesterday when my customer of 10 years asked me to help him with his floor in the Bar/ grill he's bound to open tomorrow. He applied a water-based sealer (Zep) to the epoxy floor in the hope of bringing up the luster and covering up minor imperfections.
Have you been in similar situations, and what did you learn from it?
Do you educate your existing customers on how to clean non-porous materials and preventative care?

20250313_114717.jpg
 

Kenny Hayes

Member
Joined
Apr 17, 2009
Messages
9,128
Location
Yukon, Oklahoma
Name
Kenny Hayes
One thing about it, it might’ve shined it up a bit but it won’t for long. It (Zep) probably won’t last a week in that bar unless he has no traffic.
 

BIG WOOD

The Timminator
Joined
Feb 4, 2016
Messages
13,989
Location
Georgia
Name
Matt w.
If he just slapped on one coat of Zep, it should come off easily with just a normal higher ph butyl based chemical

The thing I'd worry about is weakening the epoxy if it sits too long on it. Maybe keep your ph around 10 at the highest.
 
  • Like
Reactions: Mikey P

Kenny Hayes

Member
Joined
Apr 17, 2009
Messages
9,128
Location
Yukon, Oklahoma
Name
Kenny Hayes
Zep is not gonna weaken the epoxy, that’s for sure! It’ll just start to dull and look like shiate! Especially when they start mopping with whatever they’re gonna use. At least a neutral cleaner I hope.
 

BIG WOOD

The Timminator
Joined
Feb 4, 2016
Messages
13,989
Location
Georgia
Name
Matt w.
I didn't think Zep would weaken it. I was referring to the chemical that strips the Zep off of the epoxy
 

Latest posts

Back
Top Bottom