Slop and Gobble test 2

Ron Werner

Member
Joined
Nov 25, 2006
Messages
8,726
Name
Ron Werner
Trial 2
This resty had been cleaned just over a month ago

I mixed 12 scoops into the 2 gallon container, poured that into the large HF jug. No tip, metering out at 4:1, plain water rinse.
DSC_0622.jpg

DSC_0623.jpg


Dwell time was no more than 5 minutes. I didn't spray it that heavy, still had fair bit left in the jug and this resty is twice the size of the last one.
th_MOV_0628slopandgobbletrial2.jpg
 

Lyman

Supportive Member
Joined
May 19, 2007
Messages
1,765
Name
Lyman
It looks like you are using 8 oz per 2 gallons.
 

tmdry

Member
Joined
Apr 7, 2008
Messages
2,508
Name
Bill Martins
I wish a manufacturer would also write my name on the top, now that's service!!

What would be the equivalent tip (6, 8, 12, etc) when you remove the tip from the HF?
 

FLYERMAN

Supportive Member
Joined
Feb 9, 2009
Messages
598
Name
Ken Raddon
The scoops are 1/2 oz. and so he has 6 oz. in that jug. Correct me if I am wrong. I ordered my jug this week. I am looking forward to using it and reporting.
 

Ron Werner

Member
Joined
Nov 25, 2006
Messages
8,726
Name
Ron Werner
Lyman said:
It looks like you are using 8 oz per 2 gallons.
I used the scoop available which is a 1/2oz scoop. They were slightly rounded full scoops. Lots of air gets in there.

Compare that with the ATTACK I normally use where I'm using 12-16full ozs and straight into the HF jug,
there is still prespray left in the jug, and in the 2 gallon container from using the S&G.
 

floorguy

Supportive Member
Joined
Nov 7, 2006
Messages
6,948
Name
Doug
pretty good.....

but do you clean that slow on the whole place???


its like in my 1 video, told my worker to go at his normal pace
 

Ron Werner

Member
Joined
Nov 25, 2006
Messages
8,726
Name
Ron Werner
I'm going a little slower than norm, kinda have my other hand occupied. But not that much faster, I like a nice even rinse stroke, esp in the real soiled areas
 
Back
Top Bottom