Spotted extractor

Derek

Supportive Member
Joined
Oct 7, 2006
Messages
2,166
Location
NY
Name
Derek
are you sure you need heat.?. otherwise those look to be good machines.
 

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
115,887
Location
The High Chapperal
Those must be good to very good units as they have been around a long time and both sellers are credible, respected vendors (and advertisers so buy both.


When they arrive you'll soon figure out they are the same unit in different colors.


I have the Mytee/Sanitaire unit which is an OK machine.

I also have the 106" version of the EDIC Bravo and it kicks ass. With a 20 ft hose and a 1 1/2 hose and wand you could clean carpet with it.
 

jrizo1

Member
Joined
Jul 15, 2012
Messages
147
Those must be good to very good units as they have been around a long time and both sellers are credible, respected vendors (and advertisers so buy both.


When they arrive you'll soon figure out they are the same unit in different colors.


I have the Mytee/Sanitaire unit which is an OK machine.

I also have the 106" version of the EDIC Bravo and it kicks ass. With a 20 ft hose and a 1 1/2 hose and wand you could clean carpet with it.
are you sure you need heat.?. otherwise those look to be good machines.
 

Old Coastie

Supportive Member
Joined
Jun 29, 2015
Messages
7,504
Location
Heart of Dixie
Name
Stephen
I paid $35 for a nearly new spotter like the Gecko. It is worth every cent.

However, one SEVERE design flaw has you filling the water reservoir directly above the vacuum motor. The slightest slop and you douche the motor.

Here's an idea guaranteed to give you TM'ers dyspepsia: buy a Rug Doctor with upholstery tool for about $400. You get plenty of suction, a decently long hose for upholstery and even the instant ability to pull a reasonable job on carpets or rugs, or slurp the overspray around sofas. The little spotters can't do all that.

Just make sure the wife doesn't see you sneaking it out the door in the morning.
 
  • Like
Reactions: Jimmy L

Larry Cobb

Member
Joined
Oct 7, 2006
Messages
5,795
Location
Dallas, Texas USA
Name
Larry Cobb
This is a very modern design done by the guy who designed the Sniper extractors.

It uses higher power 5.7" vac motors and built-in silencer:

SpotterM.png


http://www.cobbcarpet.com/zen/index.php?main_page=product_info&cPath=85&products_id=1313
 

Latest posts

Back
Top Bottom