juniorc82
Supportive Member
Have any of you stripped using a cimex? I see that they make stripping pads and think the weight of the head on the cimex would be awesome for stripping.
juniorc82 said:Have any of you stripped using a cimex? I see that they make stripping pads and think the weight of the head on the cimex would be awesome for stripping.
Fred Homan said:Did a job with Ricks pads and the weight was not enough on the Cimex. Could have used that 40lbs.....
Have you tried the 3m High productivity pads? The are very aggressive with a open mesh. They are designed for floors with heavy buildup.Found this old thread here while searching for my answer... But alas... I still need to ask something.
I'm probably going to pick up a cimex for a 20k sq ft strip job I have coming up next month. I've got 175's but I want production with a thorough strip. There's multiple (tons!!!) of wax buildup from the customer just waxing over their floor and dirt for several years on a monthly basis. I'll be using my 175's for detail around the edges I think.
My question is have any of you used grit brushes instead of stripping pads with the cimex? I've got black stripping grit brushes for my 175's that work well, and I mainly use them because these stores have so much finish built up they load the pads up so fast.
Thanks for your help.
The Cimex was invented decades before VCT.Just so you know the Cimex was invented to strip VCT floors. We are talking at about VCT floors right???
Really?The Cimex was invented decades before VCT.
The Cimex was invented decades before VCT.