TM maintenance

[alazo1]

My tm has about 2800 hours. Other then the usual oil changes , spark plugs, de-scale and air filter nothing's ever been done to it as far as maintenance. What are a few things that I should have done (valve adjustment, belts..ect). Never have had to replace any belts.

It's a maxx 450 without water pump. 3 cyl water cooled.

thanks,
Albert

 

[alazo1]

This place is like craigslist. Make a post and ten minutes later it's on the bottom

Albert

 

[Jim Martin]

Things are going to be a little slower for awhile because everyone is in Vegas........

My truck and equipment are both on a tight maintenance program....

If I was you I would check and see what the maintenance requirements are and then just step it up some....Oils and things are cheap...break downs are expensive.....

 

[packfancjh]

Do you still have your owners manual? There is an 8 page section on machine maintenace in there, section 11 I believe.

 

[Blue Monarch]

You already named the things I'd do. I'd replace those belts. When I had the valves adjusted on my machine, there was a huge difference.

I've heard of guys replacing their high pressure lines as well. Probably a good proactive step.