TNT back fire-Kohler 20 horse

richard

Member
Joined
Nov 15, 2006
Messages
129
Location
St. Louis, MO
Name
Richard Weedman
Ever time I start the machine, after the first job of the day, the thing back fires when starting. Obviously loading up at previous jobs shut down. I always run it at idle for a few minutes before turning it off. Any ideas? Carb or ignition??
 
Joined
Mar 29, 2008
Messages
9,534
Location
Hawaii
Name
Nate W.
richard said:
Ever time I start the machine, after the first job of the day, the thing back fires when starting. Obviously loading up at previous jobs shut down. I always run it at idle for a few minutes before turning it off. Any ideas? Carb or ignition??


I have a kawasaki water cooled motor and it would always backfires on me too while idling down. Scares the sh!t out of you and the customer too. I got to the point to turn the ball valve in the closed position while the machine is idling. It stops pumping gas into the carb. Hope that helps you. It works for me.
 

vincent

Member
Joined
Oct 6, 2006
Messages
1,899
Location
O'Fallon, MO
Name
Vincent Sapp
deereatingpopcorn.gif
 
Joined
May 12, 2007
Messages
2,242
richard said:
Ever time I start the machine, after the first job of the day, the thing back fires when starting. Obviously loading up at previous jobs shut down. I always run it at idle for a few minutes before turning it off. Any ideas? Carb or ignition??

Try a new air filter and a set of plugs.
 

handdi

Supportive Member
Joined
Feb 1, 2008
Messages
1,039
Location
Anderson sc
Name
Randy
pull your vac hose off of the machine before ya take it down to an idle
and a new set of plugs prob wo'nt hurt either
 

richard

Member
Joined
Nov 15, 2006
Messages
129
Location
St. Louis, MO
Name
Richard Weedman
handdi said:
pull your vac hose off of the machine before ya take it down to an idle
and a new set of plugs prob wo'nt hurt either
I always run at idle w/o hoses attached. I put new plugs and air filteron - we'll see.
 
Joined
Apr 3, 2010
Messages
1,960
Location
Panama City Beach
Name
Danny Strickland
i thought those engines were supposed to be run to half throttle and then be shut down??? something to do with fuel??? sounds like the carb has some fuel left in it and thus explodes upon cranking???

call Butler and see if a service advisory has been issued!!! :mrgreen:
 

Latest posts

Back
Top Bottom