CRB issue discovered.

[Nomad74]

Welp, here’s my problem.



@Jimmy L , I made you a video.

 

[Cleanworks]

Welp, here’s my problem.

View attachment 88388

@Jimmy L , I made you a video.

Always knew you had a screw loose.

 

[hogjowl]

Get your own jokes

 

[Nomad74]

That cover was a bear to pull off. I was hoping I could slap it back together after pulling out the screw, but unfortunately the gear has a major flat spot and won’t spin anymore. So,I guess I’ll just wait for my new parts to come.

 

[hogjowl]

I see the problem
Four of them

 

[Nomad74]

I see the problem
Four of them

Count again. Theres 5

 

[Cleanworks]

His vision is not what it used to be.

 

[Nomad74]

Okay guys, and not Meg, what is the correct type of grease to lube my new gears?

 

[Cleanworks]

Okay guys, and not Meg, what is the correct type of grease to lube my new gears?
[/QUOTE KY jelly.

 

[Mikey P]

I thought you had a shop.

 

[Nomad74]

I thought you had a shop.

I went home between jobs to pet my dog and take apart my CRB.

 

[Old Coastie]

Okay guys, and not Meg, what is the correct type of grease to lube my new gears?

White lithium grease.

 

[Nomad74]

Thanks.

 

[Nomad74]

These gears are a royal pain in the ass to pull. Going to try my gear puller next and try to remove them without going postal. I hate to say it, but I’m looking forward to the Mytee release of the belt drive version.

 

[Nomad74]

Nope. Thats not going to work How the F*** do you pull this POS gear off!!!!!!!!! I’m getting hot. Im about to start breaking stuff.

 

[Nomad74]

Snap rings pulled. Everything turns freely. Guess I’ll hit it with PB Blaster and see if it comes off.

 

[Sierra Clean Care]

White lithium grease.

The stuff in a tube, NOT A SPRAY... the propellant they use dilutes it to much...

 

[Nomad74]

Maybe its time to also replace the brushes. See the chunk of plastic missing out of the middle?

 

[Nomad74]

The stuff in a tube, NOT A SPRAY... the propellant they use dilutes it to much...

I’m not there yet. I can’t even get these God forsaken gears off.

 

[Mikey P]

I’m looking forward to the Mytee release of the belt drive version

so am I.

 

[Nomad74]

Hey everyone. I’ve got a free CRB. Needs a little work.

 

[Nomad74]

How do I remove this gear? I removed the snap rings, turned it, put force on it with flathead screwdrivers, nothing is working. Am I going to need to dremel all the damn gears off?

 

[hogjowl]

I see Mr. Know-it-all is suddenly silent.

 

[Mikey P]

you have to remove the inner side plate out and unscrew the smaller gear axles from the back side.

 

[Nomad74]

you have to remove the inner side plate out and unscrew the smaller gear axles from the back side.

OMG. Ok thanks Mike. Looks like im breaking out the Dremel. The screws to take the cover have stripped heads. I’m in destroy mode.

 

[Mikey P]

You just made Reg's day...

 

[Mikey P]

btw, if those are Austrian gears that you bought to replace your cheap chinieeeese shit, they aint going to work.

 

[Nomad74]

Welp here I go. I’m probably paying for buying a Strong Dry now.

 

[Mikey P]

lol...whens the last time you had this brush off?

 

[Nomad74]

Ok. Cover pulled. This is a bitch! Trying to pull the gear from the other side. Its going to be a challenge.