Sapphire 12" Titanium Wand-Design flaw?

[The Boot]

You may need to bend the manifold bracket to get a better angle.

Seems like the best solution. I'll just have to be careful so I don't break it off.
Here's a thought, maybe they should test the wands before sending them out.

 

[hogjowl]

I never noticed any overspray on any of my wands until I started using a glide. The glide lifts the jets up enough to allow them to spray outside of the wand head. Until mfg’s correct for this by lengthening their slots, the problem won’t be addressed.
And then, Mikey will bitch because he has to lengthen his glides.

 

[Mikey P]

Seems like the best solution. I'll just have to be careful so I don't break it off.
Here's a thought, maybe they should test the wands before sending them out.

Be very careful bending the manifolds

 

[Trip Moses]

Is the overspray a problem on commercial carpet or residential? If it’s commercial, and you are using a glide, you may have live with a certain amount of overspray.

 

[hogjowl]

Is the overspray a problem on commercial carpet or residential? If it’s commercial, and you are using a glide, you may have live with a certain amount of overspray.

Moron

 

[Trip Moses]

Moron

It’s a wonder one of those pigs hasn’t eaten you

 

[The Boot]

Is the overspray a problem on commercial carpet or residential? If it’s commercial, and you are using a glide, you may have live with a certain amount of overspray.

Never was till I used this wand.

 

[Mikey P]

Still no pictures...