300 carpet tiles

boazcan

Member
Joined
Jan 11, 2007
Messages
1,522
Location
Tampa Bay/Central Florida
Name
Bryan C
What's the easiest way to clean 300 DETACHED dirty carpet tiles? They were swapped out for new ones. Just basic commercial soil and spills(mainly). The maintenance guy swaps when 1 or 2 get really bad.

Build a nice square and clean them?

Does anyone do this as a regular service to commercial with carpet tiles? Almost like a mat service, but carpet tiles instead.
 

Giorgio

Member
Joined
Apr 14, 2011
Messages
1,781
Location
Santa Fe
Name
Giorgio
Good question.

I would probably piss off my neighbors by spreading them out on my driveway. Fire up the noisy gas powered pressure washer. Pre-treat them with some judson or Cobbs HD. Then blast the heck out of them!

If they're really bad I might run my host scrubbers over them before blasting them with a pressure washer and let them dry.

With good aim you should be able to keep them from flying away.
 

AshleyMckendree

Supportive Member
Joined
Sep 1, 2007
Messages
1,572
Location
Versailles ky
Name
Ashley Mckendree
if its Shaw Ecoworx just make a big square and clean.

I clean 60k Sqft of ecoworx every month, and I get the same request to clean loose squares all the time.

I like to Cimex them in my wash pit, then hwe 200 at a time.
 

Giorgio

Member
Joined
Apr 14, 2011
Messages
1,781
Location
Santa Fe
Name
Giorgio
on second thought please disregard my previous post of using a pressure washer.

that was totally lame. :oops:

hwe sounds much better. shiteatinggrin
 

AshleyMckendree

Supportive Member
Joined
Sep 1, 2007
Messages
1,572
Location
Versailles ky
Name
Ashley Mckendree
George III said:
on second thought please disregard my previous post of using a pressure washer.

that was totally lame. :oops:

hwe sounds much better. shiteatinggrin

We bump the pressure to 900 when we hwe these things, and with a high sheer kit from Joe B the jets are 1/4 from the carpet... ITS PRESSURE WASHING :lol:
 

Latest posts

Back
Top Bottom