350 Chairs w/modified tools

ronbeatty

Member
Joined
Nov 16, 2006
Messages
1,436
Location
Altoona,PA
Name
Ron Beatty
A couple weeks ago we cleaned 350 chairs with Drimaster upholstery tools and a sapphire I modified to make 20ft long. Worked out great

IMG_2459.jpg IMG_5445 3.jpeg IMG_2445.jpg IMG_2454.jpg
 

Bob Savage

Member
Joined
Oct 7, 2006
Messages
1,286
Location
Dayton, Ohio
Name
Bob Savage
We clean 1200 chairs at a local mega church every year using our truckmount and dual Kleenrite upholstery tools.

We also clean their sanctuary every Halloween at 10:00 PM, which is 14,000 square feet. We run 3 wands and 2 truckmounts.

When you run dual tools, do you run 3/8" ID solution line, or 2 separate 1/4" solution lines? When we run dual wands, we need the flow of 2 separate solution lines, or we could use just use one 3/8" line and split that off inside to 2 tools.

Goes twice as fast as a single uph tool or a single wand!
 

ronbeatty

Member
Joined
Nov 16, 2006
Messages
1,436
Location
Altoona,PA
Name
Ron Beatty
When we dual wand I run separate 1/4” lines to each wand. The Hydramaster tools have a restrictor washer after the incoming filter, we run two upholstery tools off a splitter and have never had an issue.
 
  • Like
Reactions: Bob Savage

Papa John

Lifetime Supportive Member
Joined
Aug 19, 2013
Messages
6,587
Location
San Francisco, CA.
Name
John Stewart
Great set-up. Odd you didnt just use the AT and forget about the portable.
The waste tank on the AT should have 3 vac ports, but only 2 with filters-- thats the way it was on my V.
 

Latest posts

Back
Top Bottom