360i Question.

[jstucky]

Are stock jets 1.5??? Is everyone keeping stock? Would bumping up to 2 cause less clogging on jets????

I know 1.5 tips on my porty, 95015's clog quite a bit.

Is there only one angle on these style jets?? And I guess what type of jets are they called?? V, T, Low High, Big, Small. Lol


I am looking at an Excellent condition used 360i.

 

[KevinD]

I wouldn't put anything less than a 02 jet on anything I own.

 

[jstucky]

Doesn't look like they make 02 jets for 360i???

 

[Royal Man]

You mentioned a porty. A porty can't handle 12 flow. Usually have to be 6 or less. (You can likely put in what ever jet you want )

 

[shadygrady]

I choked my machines down to 3 x .05s. No issues with clogging with in-line filters on HP lines.

 

[GCCLee]

Stock Jets here, no need to make a change.

 

[jstucky]

Which filters are you using on High pressure lines shadygrady???

 

[Larry Cobb]

Jordan;

The jets in the RotoVac are 1/8K1.5 FloodJet type.

They are equal to a #3 jet size in a Veejet.

Here is a brass Jet Filter:

View attachment 1438
http://www4.cobbcarpet.com/zen/index.php?main_page=product_info&cPath=68&products_id=5093

Larry

 

[shadygrady]

Thanks Larry, those are the ones.

 

[jstucky]

Do those go on solution line with QD's??? or with the jets on 360i??

 

[John Olson]

Those are in line screens you should have those on all your wands and on your hydroforce. The jets on the Rotovac are called flood jets. There isn't any reason to change them they work like they are supposed to just how they are

 

[Larry Cobb]

Do those go on solution line with QD's??? or with the jets on 360i??

Usually, right before the solution valve.

Larry

 

[floorguy]

You mentioned a porty. A porty can't handle 12 flow. Usually have to be 6 or less. (You can likely put in what ever jet you want )

Where in that question did you get it would be running a 12 flow???

the only rotary that has 6 jets is the rex...

hoss..well it has its own spray bar...

RX has 5

360 has 3

 

[floorguy]

they go right after your male part

seriously it goes right after where you hook your tool to the line....in fact it should be connected to the QD of choice on the tool..

 

[jstucky]

Alright..thanks guys!