Bentley Wand Jets

[Larry Cobb]

Since there has been a lot of comments on the Bentley jet placement,

I am posting our setup for the Bentley 12" Wand :

View attachment 1173

This wand is on sale for $299, a steal for quality 12" cast head, 12" stainless glide, with 2" carbon fiber tube.

Probably the best 12" wand available.

Larry

 

[renegade_cowboy]

Since there has been a lot of comments on the Bentley jet placement,

I am posting our setup for the Bentley 12" Wand :

View attachment 1173

This wand is on sale for $299, a steal for quality 12" cast head, 12" stainless glide, with 2" carbon fiber tube.

Probably the best 12" wand available.

Larry

What about streaking from the jets? Is this a modified jet set up?

What are the benefits of the stainless steel glide over teflon?

 

[renegade_cowboy]

Plus i am 6'2, so is this the smaller size?

 

[Larry Cobb]

What about streaking from the jets? Is this a modified jet set up?

What are the benefits of the stainless steel glide over teflon?

The jets are modified by Cobb to raise them higher off the carpet.

This minimizes any jet streaking.

Stainless glide lasts longer, but does have more friction.

With the optional Gunjet handle, it is fine for your height.

Larry

 

[Shorty]

Is it normal for the stainless steel lips to fall off so easy?

I do have a glide on mine, the ss stay on the shelf.

Ta.

 

[Larry Cobb]

Shorty;

Most of them fit tightly.

We always take the burrs off the metal casting,

and use Goop to seal both types of Glides on.

Larry

 

[Jeff Brown]

Does the stainless steel glide work as smooth as teflon?

 

[Eric Valentine]

Stainless Glides:

The jets are modified by Cobb to raise them higher off the carpet.

This minimizes any jet streaking.

Stainless glide lasts longer, but does have more friction.

With the optional Gunjet handle, it is fine for your height.

Larry

 

[Larry Cobb]

Does the stainless steel glide work as smooth as teflon?

Nope,

but it does last longer and scrub better.

Larry

 

[FredC]

Larry,

Is the additional piece attached to the original mount point a Cobb thing or is that standard on a Bentley now?
Is it also on the 14" 4 jet?
Is the width between the two jets (and inside on 14) increased also?

 

[Larry Cobb]

Larry,

Is the additional piece attached to the original mount point a Cobb thing or is that standard on a Bentley now?
Is it also on the 14" 4 jet?
Is the width between the two jets (and inside on 14) increased also?

Fred;

John is adding the 4-Jet set-up on the 14" Bentleys.

View attachment 1185

Shown with Optional GreenGlide.

Here is the jet spacing for the 12" that we have modified:

View attachment 1184
They can be angled left or right from what is shown in the photo below.


View attachment 1188

Wand Link:
http://www4.cobbcarpet.com/zen/index.php?main_page=product_info&cPath=76&products_id=4807

Larry

 

[XTREME1]

any reviews on this wand. Not sure I need another but was always interested in this one