ruff
Member
Every other month?
That's depressing.
Ain't you got nothing better to do with your free time?
That's depressing.
Ain't you got nothing better to do with your free time?
I have a challenge for you Darcie. I've been trying to find someone intelligent enough and knows a little bit about this business to do this. I'd like someone to write articles about carpet cleaning on Facebook that we could all share amongst ourselves and with our friends on fb. Articles about cleaning frequency, proper cleaning, health benefits, spot removal, benefits of protection, carpet vs hard floors and indoor air quality. I could do it but I want them to look like they came from an authority and we are just sharing them. So what do you and others think of the idea??My skill set extends much further than being a sappy newlywed. I know nothing about cleaning, but fifteen years in retail, twelve of those in management, and a BS in writing make me knowledgeable in a lot of areas. Who knows, I might be useful here instead of being pure entertainment.
I have a challenge for you Darcie. I've been trying to find someone intelligent enough and knows a little bit about this business to do this. I'd like someone to write articles about carpet cleaning on Facebook that we could all share amongst ourselves and with our friends on fb. Articles about cleaning frequency, proper cleaning, health benefits, spot removal, benefits of protection, carpet vs hard floors and indoor air quality. I could do it but I want them to look like they came from an authority and we are just sharing them. So what do you and others think of the idea??
What do you mean, look like they came from an authority? You mean use citations from accredited sources?I could do it but I want them to look like they came from an authority and we are just sharing them.
Whut?
Since when is a good old fashion "thank you" not enough Darcie?
j/k
I know how men operate: hey look, a new chick. What can she do for me?
You're welcome, I was born to entertain.
Hey now don't be stealing my job! Its all I'm good at.You're welcome, I was born to entertain.
When im down at pembertons on the 23rd we are going to take video of the machine, the space left, the specs of the machine so anyone who is interested can see what all is involved.
Sometimes different is good, sometimes just different. I would have to surmise that Sapphire went to a drive shaft like Hydramaster and Cleanco because it's proven to work well. Don't fear the shaft! Greasing the bearings from under the hood takes a $10 extension tube (cheaper if you make it from a scrap of tubing like we did) and involves maybe a minute of your time.
PS: In this application, greaseless bearings fail faster than the ones that need an occasional pump of grease. Swapping bearings or replacing a damaged shaft is a lot more painful than a minute every other month adding grease. And, unless you're a complete baboon and don't notice overfilling the fitting, it doesn't throw grease all over the engine compartment.
PPS: Fortunately all of that stuff between the seats in a CDS is covered by a "doghouse" that easily lifts out with no latches or bolts to undo. It also hides the fact that all of those fiddly bits have been removed from the engine cover, so removal of the cover is easier than shown in the video.
Chavez will be posting soon.
When im down at pembertons on the 23rd we are going to take video of the machine, the space left, the specs of the machine so anyone who is interested can see what all is involved.
ohh hell Junior, thats just the begininng. You better leave with me when I order a round of drinks. LOLI paid for Saigers lunch, even though he talked my ears off the whole time and I never got a word in.
So, I won't mind paying for someone who's English I can't understand.
Until now, I was under the impression the Ozzie always had a clue about what he was talking about.Sometimes different is good, sometimes just different. I would have to surmise that Sapphire went to a drive shaft like Hydramaster and Cleanco because it's proven to work well. Don't fear the shaft! Greasing the bearings from under the hood takes a $10 extension tube (cheaper if you make it from a scrap of tubing like we did) and involves maybe a minute of your time.
PS: In this application, greaseless bearings fail faster than the ones that need an occasional pump of grease. Swapping bearings or replacing a damaged shaft is a lot more painful than a minute every other month adding grease. And, unless you're a complete baboon and don't notice overfilling the fitting, it doesn't throw grease all over the engine compartment.
PPS: Fortunately all of that stuff between the seats in a CDS is covered by a "doghouse" that easily lifts out with no latches or bolts to undo. It also hides the fact that all of those fiddly bits have been removed from the engine cover, so removal of the cover is easier than shown in the video.