Changed my Xentherm today

[Mikey P]

realized it been a lot longer than the 300 the manual recommends.. :shock:


Not nearly black or burnt like old blower oil but what the heck, can't hurt.

Riffled out the lower HX tubes of soot as well.


If I see an increase in temps tomorrow I'll be surprised.

How often are you VATr's doing the swap and riffling? (is that a word?)

 

[Guest]

seems like Shawn F. said you can use the transfer fluid for a long time. How did it look ?

 

[Mikey P]

Darker then new but fine IMO.

 

[Jim Martin]

when I loose 20 degrees then I change mine.......that is the only time I have ever noticed a difference in the temps......

 

[Steve Lawrence]

what a pain in the ass machine





jk==nice to have power

 

[Mikey P]

can be Steve, but I'd never be with out a Dual Wanding truck.


Look for Judson to bring a DW'r to M7F.

 

[TimP]

Look for Judson to bring a DW'r to M7F.

I'm looking forward to seeing this machine

 

[Doug Cox]

So what is the top temp you get on a Vortex? Whats the opinion on my Genesis, I've never dual wanded with it, will it do the job?

 

[Ron Lippold]

im running mobile therm 603 at 75 bucks for 5 gallons 230-240 all day with 24 flow

 

[Mikey P]

im running mobile therm 603 at 75 bucks for 5 gallons 230-240 all day with 24 flow

Interesting.

 

[Shawn Forsythe]

So, Mike...

Did you use Dynalene, a Mobiltherm, or a Therminol?

We've been using Mobiltherm 605 for our customers with good results. Relatively inexpensive, and easy to get.

 

[Jim Martin]

So, Mike...

Did you use Dynalene, a Mobiltherm, or a Therminol?

We've been using Mobiltherm 605 for our customers with good results. Relatively inexpensive, and easy to get.

where do you get it.......

 

[Mikey P]

Used up the last of my Dyno,


I'll use the cheap stuff next time.

 

[Shawn Forsythe]

[quote="Shawn Forsythe":2mc1r6ns]So, Mike...

Did you use Dynalene, a Mobiltherm, or a Therminol?

We've been using Mobiltherm 605 for our customers with good results. Relatively inexpensive, and easy to get.

where do you get it.......[/quote:2mc1r6ns]

Jim, for the Mobiltherm
Try:
Western Refining, Inc.
Tempe Administrative Office
1250 W. Washington Suite 101
Tempe, AZ 85281
Phone: (602) 286-1401

Lubricants Facility - Phoenix
2040 W. McDowell Road
Phoenix, AZ 85009
Phone: (602) 353-4870

 

[Jim Martin]

Thank you..............