Cobby pulled a fast one..

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
116,801
A while back we were talking ball valves and Larry said he had a new one that he was testing and impressed by so I told him to send me some and they've been sitting in the bag on my desk ever since. I finally got around to opening one and notice the fine print.

IMG_20170807_131442.jpg


I thought Larry and Joe were archenemies so I was very surprised to see Larry promoting this product.. Has anyone else tried these? they do look sturdy but only time will tell if they are Bob Foster tough
 

Mark Saiger

Mr Happy!
Joined
Dec 26, 2006
Messages
11,200
Name
Mark Saiger
The valve worked well and I am not sure how long it would last because we kept breaking off the red handle on top. So for us they were only lasting about a week unfortunately so I couldn't get a fair assessment of the entire valve. But we are very frustrated with shut-off valves right now in the industry
 

Mark Saiger

Mr Happy!
Joined
Dec 26, 2006
Messages
11,200
Name
Mark Saiger
I looked around in my shop and spare parts bin to see if I could figure out a different valve top to put on it..... but with it being so busy I didn't have time to check that out to see if I could make something work
 

jmo

Supportive Member
Joined
Apr 11, 2011
Messages
350
Name
Jeremy
Those valves work pretty good for us. The one that is on the line now is about 8 months old.
 

KSL

Member
Joined
May 7, 2017
Messages
220
Name
Kent
We utilize these ball valves from Joe.(JoeValve. $13.00)They are very sturdy, the paint does chip off but we haven't experienced any failures yet.
 

Desk Jockey

Member
Joined
Oct 9, 2006
Messages
64,833
Name
Rico Suave
Mikey can't use it if it doesn't look purdy
I buy them 2 dozen at a time. Nothing more irritating than a "Shut Off" that doesn't shut off. They do get chewed up dragging them on the concrete. Once they start to look rough we replace the valve and QD.
 
  • Like
Reactions: Dolly Llama

hogjowl

Idiot™
Joined
Oct 7, 2006
Messages
49,881
I'm still at the point where mine don't get chewed up.
Because it's just me and Jr.
I can't imagine how frustrating real employees must be.
 
  • Like
Reactions: Desk Jockey

The Great Oz

Member
Joined
Nov 25, 2006
Messages
5,292
Name
bryan
Once they start to look rough we replace the valve and QD.
Yeah, cuz when that valve goes bad, you can be sure it had some influence on the QD. Pretty soon every fitting the QD comes in contact with goes bad too, including the new valve.

Now I know why our new valves don't last. Thanks Richard!
 
  • Like
Reactions: Desk Jockey

Shane T

Member
Joined
Nov 7, 2006
Messages
1,663
Name
Shane Tiegs
I've been using them quite a while and they have served me well. They are a bit difficult to turn open and closed.
 
  • Like
Reactions: SamIam

ruff

Member
Joined
Apr 19, 2007
Messages
11,010
Name
Ofer Kolton
Since these days all small companies get gobbled up by larger ones.
Does it mean that Bristor bought cobby?

I drag all valves on the concrete. I want them to know that it's a dog eat dog world out there & they'd better toughen up.
 
Last edited:

Desk Jockey

Member
Joined
Oct 9, 2006
Messages
64,833
Name
Rico Suave
Bristor I love that guy.

Oh wait, he's that crazy dude isn't he? The soup Nazi?

I no like that guy very much. :winky:
 
  • Like
Reactions: BIG WOOD

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
116,801
I buy them 2 dozen at a time. Nothing more irritating than a "Shut Off" that doesn't shut off. They do get chewed up dragging them on the concrete. Once they start to look rough we replace the valve and QD.


You buy them from Joe?


I'm shocked he would sell to a mexican


























































who's an MB Mod.
 

Mark Saiger

Mr Happy!
Joined
Dec 26, 2006
Messages
11,200
Name
Mark Saiger
is the handle painted pop metal?
Still a little paint left on it.View attachment 73895

In JMO pic, that looks different than the handles that were on mine...so that could be changed and updated...which would be great....

Mine kind of looked like the ones in Mikey's pic, but If I could see on top where the screw mounts in, maybe I could see better....

We just had problems with the handle but the rest of the valve was doing well....but again....the handle didn't last long enough so we could really test the valve on ours....

It would be nice to hear about a valve that is surviving....

I am looking to maybe get some Swagelok shut offs to try.... I saw them on Erik's new Aerotech, and he seems to be having good luck with them
 

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
116,801


nothing special...
 
  • Like
Reactions: Mark Saiger

Larry Cobb

Member
Joined
Oct 7, 2006
Messages
5,795
Name
Larry Cobb

This is the one you need :
Parker2000.jpg
It is rated for 2000 PSI and 300 degrees.
 
Last edited:

Latest posts

Back
Top Bottom