This has been my experience as well with the Joe valve. Bought two several months ago. Still on the first one.
Cobby pulled a fast one..
- Thread starter Mikey P
- Start date
Those and the ones with the black handle that the our suppliers sell like candy are a joke. Good luck keeping the handle on before it starts messing up
Steve Lawrence
Member
These have been pretty good for us. Good idea to use Lock Tite on the threads of any of these shutoffs so you don't lose the handle.;
https://www.directmaterial.com/stainless-steel-316-mini-ball-valve-1000-psi-wog.html
https://www.directmaterial.com/stainless-steel-316-mini-ball-valve-1000-psi-wog.html
Mark Saiger
Mr Happy!
I actually got some new valves from my Minneapolis Distributor that had red handle and rated for 1000 psi...
They actually started leaking in a week also and wouldn't shut off properly....
BUT the worst part, I discovered using the Zipper SS Super Spinner using one of them, it started to choke off and restrict the flow....and I was getting less than 500 psi at the Zipper even though the TM was at 1000 psi....
One of the spinners was just barely spinning....Took me a little time to figure out, but by luck, we had both trucks set up, so I hooked up to the other Butler and sure enough...the only thing I had changed the day before was the shut off and soon as I replaced it, we were back running correctly....
I would have had no clue what was up except for being lucky to kind of retrace thing done in past day with the TM....;
They actually started leaking in a week also and wouldn't shut off properly....
BUT the worst part, I discovered using the Zipper SS Super Spinner using one of them, it started to choke off and restrict the flow....and I was getting less than 500 psi at the Zipper even though the TM was at 1000 psi....
One of the spinners was just barely spinning....Took me a little time to figure out, but by luck, we had both trucks set up, so I hooked up to the other Butler and sure enough...the only thing I had changed the day before was the shut off and soon as I replaced it, we were back running correctly....
I would have had no clue what was up except for being lucky to kind of retrace thing done in past day with the TM....;
Mark Saiger
Mr Happy!
J
JS41035
Guest
Mark Saiger
Mr Happy!
Well I had some time to dig out the valve with the failed handle. It is not branded with Wanders.
I had only bought 2 a few years ago when the BF tough was being spoken so these that I have are possibly different.
My guys used their a couple years ago and I remember them telling me about the handle falling off right away so I guess I never took time to try the one I had until few weeks ago.
Took some pics.
The pics of the red handle unit with 1000 psi on it lasted about a day.
You will have to let me know how yours holds up @Mikey P
I had only bought 2 a few years ago when the BF tough was being spoken so these that I have are possibly different.
My guys used their a couple years ago and I remember them telling me about the handle falling off right away so I guess I never took time to try the one I had until few weeks ago.
Took some pics.
The pics of the red handle unit with 1000 psi on it lasted about a day.
You will have to let me know how yours holds up @Mikey P
steve_64
Member
- Joined
- Aug 11, 2012
- Messages
- 13,372
SamIam
Member
Saiger" data-source="post: 4525269" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">
Those are a lot different the new joe valve last along time sometimes need tightening.
Then replacing.
I get get a year or more out of mine!
And I bought like 10 so I don't have to be nice to Joe for 5 more years!
1900 North
Member
I looked on Larry's web site but didn't see the ball valve shown in the picture. Is it there and I just missed it?
hogjowl
Idiot™
Nobody knows
Including Larry
SamIam
Member
1900 North
Member
Really. The one he is showing in this thread has flat gull wing (sorry, can't think of a better analogy) handles and yellow plastic covers on each end of the handles.
F
FB7777
Guest
Larry Cobb
Member
That ball valve is not on the cart.
Billy Lewis has been using some on a 2000PSI application.
SamIam
Member
That ball valve is not on the cart.
Billy Lewis has been using some on a 2000PSI application.
Who?
Nate The Great
Member
Larry Cobb
Member
Yea, Aerotech cleaner in Lexington Kentucky.
Matt B
Member
Bill ...., u clean Aerotechs
Matt B
Member
Life is too short not to torment Chavez......
SamIam
Member
Ya he has a 650 now!
1900 North
Member
Where does he purchase them? Do they have a name? Where can they be purchased?
F
FB19087
Guest
I like the $4 1/4in ball valves from home depot. Made in Italy and they out last any of the industry specific ones I've used.
You can just replace the handle with a smaller one or cut part of it off make it shorter then put the rubber sleeve back on.
So cheap it's easy to keep 4-5 on hand
You can just replace the handle with a smaller one or cut part of it off make it shorter then put the rubber sleeve back on.
So cheap it's easy to keep 4-5 on hand
Dolly Llama
Number 5
I agree .
ball valves have never been an issue for us .
The cheap ones last as long as the hi-priced ones.
Mater of fact, I've had more trouble with these ones by Dwyer than the cheap ones
I'll say though, we rarely ran PSI higher than 600 and never did tile 'n grout
Maybe that's why I don't understand all the fuss with many of the cowboys here??
..L.T.A.
Mikey P
Administrator
Well, duh..
hogjowl
Idiot™
Ignore him
He doesn't clean anymore
And we know why
He doesn't clean anymore
And we know why
