Dual Wanding w/ 2 TM's & 1 Truck

[joe harper]

Tell you what ...GeoRgIe BoY... :idea:

We can "HOOK-UP"....TM to TM...BLOWER to BLOWER.."With 5 1/2 PVC pipe... :shock: "

I will "BURN" your Vortex to the gRounD... :!: :!: :!: :!:

I will "SlinG your PTO shaft to CHINA in about 10 minutes.....

I will SHOW you what REAL POWER IS.....rEdnEcK style... !gotcha!

H-25..NISSAN ..."real motor".. thathurts

Bring your "pink slip"..... :idea: ....Then you can WAVE goodbye to your VoRteX on a roll-back.!

This ...."old girl".... is a.....{BEAST}... !gotcha!

 

[Out of Character - 0]

How many Hg's will that prochem pull before she quit's? Belt driven or coupler?

I've always wondered why Prochem says to run 13hg? Is the weak link the tank or the drive system?

There's quite a difference between 13 and 17.

 

[joe harper]

How many Hg's will that prochem pull before she quit's? Belt driven or coupler?

I've always wondered why Prochem says to run 13hg? Is the weak link the tank or the drive system?

There's quite a difference between 13 and 17.

BELT DRIVEN...5.9 BLOWER..

The 13 hg is the manufactures reccomendation..... :idea:

It will pull 18 to 20 hg.."No problem"...we ran it @ 18hg to "TEST"...our custom Waste Tank..!

Here is the FACTORY TANK....Notice the THREE ..2 inch ports...Designed for 3 wands...:shock:

I believe it is a 235 gallon Waste tank..."IT IS HUGE"..took-up Toooo much floor space..!!!

 

[George V]

Harpie!

You don't think your 50 HP (who knows how little torque) carburated 5.9 has more suck than my diesel 175 hp with 385 ft/lbs torque do ya?

all i got to do is tighten up my belts and turn up the mercury until your motor stalls!

i might even be able to stall both your motors at the same time!

Here's a better idea. when u lose you keep your truck (that's punishment enough). but you also have to drive it around for a year with the new wrap i designed for ya!

 

[joe harper]

Harpie!

You don't think your 50 HP (who knows how little torque) carburated 5.9 has more suck than my diesel 175 hp with 385 ft/lbs torque do ya?

all i got to do is tighten up my belts and turn up the mercury until your motor stalls!

i might even be able to stall both your motors at the same time!

Here's a better idea. when u lose you keep your truck (that's punishment enough). but you also have to drive it around for a year with the new wrap i designed for ya!

I Must SaY...I lOvE the NEW WRAP....
I think ..I will put the Tech's..In WiFe BeaTerS & OverAllS... :idea:

62 HP...sonny...if you tighten you BELT's...I will .."pUkE" the berrings..out of that PTO
shaft...in 90 seconds... :roll: i fiGuRe i can mElT the belts off in about 5 minute... !gotcha!

Then your 385 ft lbs of tourque ...will "gReNaDe" that RaTTLE TraP..into ..HypeRsPaCE...




BEWARE of the WALL..... :mrgreen:

We knoW HOW to ....."STOP".....big trucks in a hURRy...DowN HiThEr... shiteatinggrin

"777" hundred peices of .."sChRaPtNaL".... :shock:

 

[George V]

Who you calling sonny Harpman?

I been cleaning floors since '82.

Only put 20 years on my profile so folks don't think I'm an old fart like you.

Congratulations! You lose again...

 

[daniel@procarpet]

Tell you what ...GeoRgIe BoY... :idea:

We can "HOOK-UP"....TM to TM...BLOWER to BLOWER.."With 5 1/2 PVC pipe... :shock: "

I will "BURN" your Vortex to the gRounD... :!: :!: :!: :!:

I will "SlinG your PTO shaft to CHINA in about 10 minutes.....

I will SHOW you what REAL POWER IS.....rEdnEcK style... !gotcha!

H-25..NISSAN ..."real motor".. thathurts

Bring your "pink slip"..... :idea: ....Then you can WAVE goodbye to your VoRteX on a roll-back.!

This ...."old girl".... is a.....{BEAST}... !gotcha!

What's the story behind that old girl?

How did you get her and what did she cost?

 

[joe harper]

Who you calling sonny Harpman?

I been cleaning floors since '82.

Only put 20 years on my profile so folks don't think I'm an old fart like you.

Congratulations! You lose again...

Well ...sonny... :!:

You should change it to "10" yeARS..

If you are STILL,"slinging" a wand after "20" years....... :shock:

"YOU HAVEN"T BEEN VERY SUCESSFUL@ IT."..... :roll:

 

[tmdry]

Harper,

When running both TM's, can you have the side doors closed so it minimizes noise levels? Also, what have you done under the truck (silencers, etc) to help reduce the noise levels as well? This is an issue for us for nightly commercial accounts that have a hotel or luxury condo above the commercial facility, they're not always too happy with the "roar".

 

[George V]

Actually, i was taken out of the bussiness for 6 years due to a motorcycle wreck... (I hate THAT when THAT happens!!!) shiteatinggrin had to start over again in 2005.

i do ok for an ol' hillbilly with no edumication....

got's my family, my Vortex and we vacation once a year...

What else could a fella ask for?

ps. nothing personal bro! i was just hackin on ya! are we still friends?

 

[joe harper]

Harper,

When running both TM's, can you have the side doors closed so it minimizes noise levels? Also, what have you done under the truck (silencers, etc) to help reduce the noise levels as well? This is an issue for us for nightly commercial accounts that have a hotel or luxury condo above the commercial facility, they're not always too happy with the "roar".

Bill,

These prochem's are extreemly quite...You can talk on the phone @ 20 feet.."no problem"

Another "unique" quality of this BOX......"beside the vanity step's"....is there is NO back door.!

If you had a NOISE issue..? You can point the truck in the OPPISITE direction of the building.!!!

This FOCUSES....all of the noise in another direction.. 8) It is very similar to a "Woofer"
speaker... :idea: The vibration & volume....Has a specific direction... 8) 8) 8) The enclosed
BOX..acts as a silencer "itself"...!

 

[lance]

Harper, what's in that little trailer on the left hand side of the pic? Is it a TM or just eqip for water restoration?

 

[tmdry]

Harper,

When running both TM's, can you have the side doors closed so it minimizes noise levels? Also, what have you done under the truck (silencers, etc) to help reduce the noise levels as well? This is an issue for us for nightly commercial accounts that have a hotel or luxury condo above the commercial facility, they're not always too happy with the "roar".

Bill,

These prochem's are extreemly quite...You can talk on the phone @ 20 feet.."no problem"

Another "unique" quality of this BOX......"beside the vanity step's"....is there is NO back door.!

If you had a NOISE issue..? You can point the truck in the OPPISITE direction of the building.!!!

This FOCUSES....all of the noise in another direction.. 8) It is very similar to a "Woofer"
speaker... :idea: The vibration & volume....Has a specific direction... 8) 8) 8) The enclosed
BOX..acts as a silencer "itself"...!

Makes sense.

Do you prefer having both TM's sticking out the same side vs if they were on both sides of the truck (if they were to fit)? Say a dual sliding door on both sides.

Also, I could not find a box like yours, which sites have custom boxes that you could direct me to.

Thanks

 

[joe harper]

one side...just makes more sense...!

The main reason I bought the TRUCK was the box...!
I love the vanity srairs...So easy to lift ..175's,RX 20..ect,ect...Easier on the back.. !gotcha!

I also Like the LOW PROFILE of the box...I think it looks & performs better.. 8)

The NEW Truck will have 2 sets of vanity stairs... :idea:

Any custom box builder can produce this style of box... :!:

 

[George V]

Who you calling sonny Harpman?

I been cleaning floors since '82.

Only put 20 years on my profile so folks don't think I'm an old fart like you.

Congratulations! You lose again...

Well ...sonny... :!:

You should change it to "10" yeARS..

If you are STILL,"slinging" a wand after "20" years....... :shock:

"YOU HAVEN"T BEEN VERY SUCESSFUL@ IT."..... :roll:

Ouch!!!

Two days later and that one still stings....

Almost lost my left nipple in that wreck you dickhead!

Two broken knee caps, missing right bicept (it grew back thank God), nerve damage left arm, 60 series tire tattoo across my front torso (remember, always wear a shirt when u ride street) and just a little bitty problem with my neck.

I'm thankful I'm able to clean at all.

So **** you Joe Harper!

Now its personal.

 

[tmdry]

Is Harper the only one with the 2 TM's in a truck on this board?

 

[joe harper]

[quote="George V":1a74z4d0]Who you calling sonny Harpman?

I been cleaning floors since '82.

Only put 20 years on my profile so folks don't think I'm an old fart like you.

Congratulations! You lose again...

Well ...sonny... :!:

You should change it to "10" yeARS..

If you are STILL,"slinging" a wand after "20" years....... :shock:

"YOU HAVEN"T BEEN VERY SUCESSFUL@ IT."..... :roll:

Ouch!!!

Two days later and that one still stings....

Almost lost my left nipple in that wreck you dickhead!

Two broken knee caps, missing right bicept (it grew back thank God), nerve damage left arm, 60 series tire tattoo across my front torso (remember, always wear a shirt when u ride street) and just a little bitty problem with my neck.

I'm thankful I'm able to clean at all.

So ACE you Joe Harper!

Now its personal.[/quote:1a74z4d0]



Geeez....!!!!

Did your finger get bRokEn....??????????

Check my REPLY to your PM....."note"....the time & date...!!!!!!!!








George,

I am not upset....

We are just having some FUN....

we are ...."cool"

Thanks for your concern...!
Harper

Sent at: Mon Nov 15, 2010 11:53 am

 

[joe harper]

Is Harper the only one with the 2 TM's in a truck on this board?

Bill,

I know of NO ONE anywhere that...that is currently operating this type of set-up.....!

It is not a cheap experiment...!

 

[tmdry]

Is Harper the only one with the 2 TM's in a truck on this board?

h

Bill,

I know of NO ONE anywhere that...that is currently operating this type of set-up.....!

It is not a cheap experiment...!

Seems like well worth the investment though.

 

[George V]

oh yeah, I did get ur reply. Thanks Joe!

Guess ur question caused me to slip a belt and I lashed out at you.

My bad :-(

 

[Bob Savage]

This FOCUSES....all of the noise in another direction.. It is very similar to a "Woofer"
speaker... The vibration & volume....Has a specific direction... The enclosed
BOX..acts as a silencer "itself"...!

Bass is non directional FYI. Wrong analogy.

However, in the case of a PD blower, the noise comes from the discharge hose/pipe, which means that noise is directional.

You also don't need 2 separate truckmounts to properly dual wand.

 

[Brian R]

You guys crack me up. :roll:

Remember it's just carpet we are cleaning. :idea:

Maybe instead of spending all that money on machinery, you should spend some money on training your Techs so they can clean properly and not need all that "power" to blast through the dirt.

Do I really need to create a list of Con's since Harpocrite is to shy to do it?

Love you too.

This boner thread has been brought to you by someone who is waaaaay to unsure of himself and needs to promote something big to make up for his inadequacies.

I'm sure the first lame ass response from Harpo will get all you other big machine followers in an uproar as well.

Carry on. :mrgreen:

 

[joe harper]

You guys crack me up. :roll:

Remember it's just carpet we are cleaning. :idea:

Maybe instead of spending all that money on machinery, you should spend some money on training your Techs so they can clean properly and not need all that "power" to blast through the dirt.

Do I really need to create a list of Con's since Harpocrite is to shy to do it?

Love you too.

This boner thread has been brought to you by someone who is waaaaay to unsure of himself and needs to promote something big to make up for his inadequacies.

I'm sure the first lame ass response from Harpo will get all you other big machine followers in an uproar as well.

Carry on. :mrgreen:

Hi-Jack another thread ....idioT... :roll:
There is info in here for REAL CLEANERS.... thathurts

 

[Brian R]

I believe it was right on topic.

If you put 2 TMs in one truck you're a "real" cleaner alright...a real DUMB cleaner.
Good God.


Edit: The only good reason to put more than one TM in a truck is so you can haul it to all the cleaning events and try to sell them to cleaners.

 

[Lee Stockwell]

Brian with all due respect you couldn't clean your way out of a paper bag.

You don't even own a Rug Doctor....

However you ARE funny and valued here for comic relief.

 

[Brian R]

Thanks....I think...


Hey, I will be ordering my Orbot sometime this week or next. :!:

I'll be a carpet cleaning mofo all over again....I have a ton of jobs I need to make 100% on. :mrgreen:

At least for a little while.

Hmmm....$100,000.00 or $5,000.00 to clean the carpet :?:

Let me consult my accountant and calculater on this and get back to you. shiteatinggrin

 

[Ryan]

It still makes more sense to have two vans and two TM's. Harper may be profitable with a set up like that because of his demographic.

What is you average ticket Harper if you don't mind me asking?

Mine is $175, so unless I was going to dedicate a truck like that to commercial only I don't think I could ever be real profitable with a set up like that.

 

[Out of Character - 0]

It's most helpful when only one employee has a drivers license.

 

[Ron Lippold]

brian you over look the simple things..... A good judson unit and some judson juice and you will be a hero not a zero. just think what people would think of you if you where doing what you talked about, and you would make more money,, even if you were givig your top guy 30% . wow

 

[Brian R]

Ron, I would only be a hero here....and that doesn't do much for me.

I think a good TM has it's place and is needed in certain situations...but it isn't the end all to end all.

I've owned TMs, Chem-Dry's, Porty's....I've worked them all and the end result isn't much different on your residential customers carpet.

Yes a flood is a different story and even a bad urine contamination is different...but everyday stuff is not.

As long as you have good chems, good aggitation, good time and maybe some heat ....everything is okydoky.


I think most of the TM guys are majoring in the minors....just my opinion.
Focusing on the "what" instead of the "who".