realclean
Member
- Joined
- Sep 4, 2012
- Messages
- 429
- Name
- Jesse Lowe
Do you need to rinse a dye stain remover after you finish with the heat?
Dye stain remover
- Thread starter realclean
- Start date
J Scott W
Member
- Joined
- Oct 16, 2006
- Messages
- 4,061
- Name
- Jeffrey Scott Warrington
You should rinse. There can be a residue that might get on someones hands or feet. Also, if not rinsed, the reducer continues to work until it has dried. It could remove some color you never intended to remove.
Not all cleaners rinse, but should.
Not all cleaners rinse, but should.
Jim Williams
Member
- Joined
- Oct 8, 2006
- Messages
- 1,465
- Name
- Jim Williams
Most reducers have a terrible smell. I always rinse thoroughly. I wouldn't want a customer to have to live with that for a few days.
Hack Attack
Member
- Joined
- Dec 19, 2017
- Messages
- 5,620
- Name
- Dan
I've also had a customer call me back saying the stain has reappeared slightly
It hadn't but I hadnt rinsed it properly, and it had dried with a visible residue. Rinse it
It hadn't but I hadnt rinsed it properly, and it had dried with a visible residue. Rinse it
Last edited:
Goomer
Member
- Joined
- Feb 9, 2009
- Messages
- 3,398
- Name
- Frank Mendo
Are there any valid arguments to support NOT rinsing it?
jcooper
Member
- Joined
- Oct 7, 2006
- Messages
- 3,232
- Name
- Jerry Cooper
Goomer
Member
- Joined
- Feb 9, 2009
- Messages
- 3,398
- Name
- Frank Mendo
That's true, but at what risk?
It may very well continue to work not only after your gone, but even after the stain is gone, and what exactly is being left behind if anything when fully dried?
If I mist some 40V on an area or spot and leave it to work after I'm gone, I know that I am only leaving benign water behind in the end.
What is a reducer leaving behind after the liquid has evaporated?
I couldn't tell you.
Necessary data.
Cleanworks
Moderator
- Joined
- Oct 22, 2012
- Messages
- 28,070
- Name
- Ron Marriott
I would say most reducers must be rinsed to stop the action. Unlike peroxide products, reducers are usually designed to work quickly. Not rinsing a reducing agent may result in color loss to the carpet. The only exception is mild reducing coffee/browning agents that are designed to be sprayed on and left. These are usually liquids such as chemspec liquid browning treatment.
