encapping stairs

[Goomer]

Who sells a 6-8" brush for an angle grinder?

Much obliged.

Not sure you can find a soft brush that will adapt to the threads of an angle grinder.

Most are wire or grit for metal work.

If you can find some type of drive plate for it, you can put strips of Extreme Scotch Velcro and attach scrub pads and bonnets.

I use 8" pads from DrillBrush, and Cimex type pads are 8" also I think.

 

[Old Coastie]

Goomer is right on. Harbor Freight sells 6" drive pads for polishing and they work wonderfully with homemade pads cut from the bigger ones. I use a knife to slice the disk at a shallow angle, making an edge that gets right into tight spots.

 

[Old Coastie]