Female quick connect at machine keeps leaking

Josh Almanza

Member
Joined
Nov 22, 2016
Messages
193
Location
Houston, Tx.
Name
Josh Almanza
Changed out my hoses and installed new male on my wand since my hoses were getting harder to put on(even with no pressure on hoses) now my female at my solution pump continues to leak. Is this an indication there are issues with my pump...or just needs a new female fitting? Thanks.
 

Dolly Llama

Number 5
Joined
Oct 7, 2006
Messages
30,495
Location
North East Ohio
Name
Larry Capitoni
now my female at my solution pump continues to leak


you mean the fitting at front of TM?
and not a fitting ON the pump behind the front panel ??

if the QD (quick disconnect) is leaking at the front of TM, replace w/new

.....they don't last forever

..L.T.A.
 

Josh Almanza

Member
Joined
Nov 22, 2016
Messages
193
Location
Houston, Tx.
Name
Josh Almanza
you mean the fitting at front of TM?
and not a fitting ON the pump behind the front panel ??

if the QD (quick disconnect) is leaking at the front of TM, replace w/new

.....they don't last forever

..L.T.A.
Female at the front of my pump where I connect my solution hose to my truckmount
 

steve_64

Member
Joined
Aug 11, 2012
Messages
13,371
Metal fatigue.

Replace everything or do it one at a time.

Everythi g you put a wrench on or torque on should be replaced or it too will leak in a few days.
 

Shane T

Member
Joined
Nov 7, 2006
Messages
1,663
Location
Waukesha, WI
Name
Shane Tiegs
If the female quick connect leaks without a male fitting inserted replace it, nothing else will fix it. If it leaks with the male fitting inserted replace the o-ring or rings in the female.
 

Bob Savage

Member
Joined
Oct 7, 2006
Messages
1,286
Location
Dayton, Ohio
Name
Bob Savage
Female at the front of my pump where I connect my solution hose to my truckmount
Do you run hot water through your pump?

Most TM's run cold water from the pump through the heating system first, and then from the heating system to the front of the TM panel where you connect your hose that goes inside.
 

Josh Almanza

Member
Joined
Nov 22, 2016
Messages
193
Location
Houston, Tx.
Name
Josh Almanza
Damon on Steveo's putter??





English isn't your first language is it.....


reemplazar la
Do you run hot water through your pump?

Most TM's run cold water from the pump through the heating system first, and then from the heating system to the front of the TM panel where you connect your hose that goes inside.[/QUOTE it’s a Prochem legend gt model 2017
 
Joined
Dec 20, 2006
Messages
1,145
Location
cape coral fl.
Name
jack zerkie
I use the white magic set up and my males leak just like me. But with a shut off on the male I always blead the line on the first job each day to flush anything left from the day before. And with the male if it's open just a little you can relieve the water pressure. jz.
 

Latest posts

Back
Top Bottom