generic/aftermarket hx's?

[Hack Attack]

Read some old threads about blue baron, considering they are still going have they got through what looked like possibly a rough patch?

any other aftermarket makers worth looking at?

Im considering a winter time project with a 20hp engine

 

[Lee Stockwell]

Craftsmen get better with time.

So do con artists.

 

[Cleanworks]

Not only do you need the hx but you also need the control system to regulate the heat. You will need a bypass if you do flood work.

 

[Jim Pemberton]

Read some old threads about blue baron, considering they are still going have they got through what looked like possibly a rough patch?

any other aftermarket makers worth looking at?

Im considering a winter time project with a 20hp engine

Be very careful with how you regulate heat in any hand crafted truck mount you may make.

If you don't have a reliable method of bypassing excess heat, the steam build up in a heat exchanger can create a dangerous explosion (and its happened).

My guess is you've thought of this though.

 

[Mikey P]

Not something to go cheap on.


I'd find an old big name unit and pilfer it off of it

 

[clean image]

call don, used to be called hot heat exchanger, not cheap- start at 1200$ im guessing, for lo pressure unit

 

[Mikey P]

call don, used to be called hot heat exchanger, not cheap- start at 1200$ im guessing, for lo pressure unit

Just sure it comes with a blow off valve

 

[Jimmy L]

Would using a water heater blow off valve work?

 

[Hack Attack]

thats pretty much all the little giants have as backup to the thermostat

 

[Cleanworks]

Would using a water heater blow off valve work?

As long as its the right temperature and pressure.

 

[Dolly Llama]

Would using a water heater blow off valve work?

not rated for the PSI TM's typically run at

3 1/4 in. Standard Shank Water Heater Temperature and Pressure Relief Valve

Temperature Relief: 210°F (99°C), Pressure Relief Range: 75 to 150 psi (5.2 to 10.3 bar).



you'll be spewing jOOse

..L.T.A.

 

[Hack Attack]

If I can find a hx I'd put a LG relief on as a minimium, still weighing up pros and cons of buying another TM and just putting my predator into a trailer

I've got several regular apartments that my high roof transit can't get into the parking area at back. But a trailer unit could.
And its a pain waiting for that 1 parking space outside that apartment on the street to run hose up the outside... and it always goes down a treat with the cafes and restaurants ground level lol

 

[FB19087]

Cobb has one blower/exhaust

WLD55 - Stainless Steel Heat Exchanger [WLD55] - $1,197.94 : Cobb Carpet Supply

Cobb Carpet Supply WLD55 - Stainless Steel Heat Exchanger [WLD55] - SS Heat Exch 5.6 x 42 All Stainless Steel Heat Exchanger Hi-Pressure Design 1500 PSI for Grout Cleaning 225,000 BTU Input Capacity 2 FPT Exhaust Port; 2 Tee for Inlet; Dual 3/8 FPT Water Ports Size 46 x 6, Replaces #3 Little...

www.cobbcarpet.com

And as posted the hot heat exchangers