Hard part is over. Machine is in.

Becker

Member
Joined
Oct 8, 2006
Messages
7,359
Name
Becker
It's in. Needs to be squared up. But hard part done.

From garage floor to the van.

Getting close.

yrydamyz.jpg
 
  • Like
Reactions: Art Kelley

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
116,890
Are you going to install a wall behind the seats?

The stench and heat is unbearable with slide ins.
 
Joined
Aug 20, 2013
Messages
594
Name
Ralph Pastorelli
We wash the dirty tanks once a week and no stench but the Prochem slide in does give off a fuel smell if my guy's don't idle it down right and shut it off right away.
 

Becker

Member
Joined
Oct 8, 2006
Messages
7,359
Name
Becker
Tank is drained nightly. And rinsed often. Cooler climate most of the year no real problem.
 

Doug Cox

Supportive Member
Joined
Dec 17, 2006
Messages
4,928
Name
Doug Cox
You get the worst stink when you suck up animal piss. I empty my tank every night and have been putting bleach tabs in on a regular basis.
 

Jim Martin

Supportive Member
Joined
Oct 7, 2006
Messages
10,878
Name
Jim Martin
Tank is drained nightly. And rinsed often. Cooler climate most of the year no real problem.

I don't get any smell out of mine even in our heat...roof vet and drain it out every evening....
 

Mikey P

Administrator
Joined
Oct 6, 2006
Messages
116,890
lol...you're an old dude who smoked for too long.


Trust me, it stinks.
 
Joined
May 7, 2008
Messages
8,180
Name
I'm Rick James
If you put furniture sliders under the machine you can move it so much easier and not tear the carpet. I am about to install a HM in a new van, but I am running it out the back door with the exhaust vented under the van.
 

Becker

Member
Joined
Oct 8, 2006
Messages
7,359
Name
Becker
If you put furniture sliders under the machine you can move it so much easier and not tear the carpet. I am about to install a HM in a new van, but I am running it out the back door with the exhaust vented under the van.

I'm sure sliders would make it easier. I used them on the waste tank.
Under the machine I used 1/2 black pipe.

Worked well.
 

Latest posts

Back
Top Bottom