High HG truckmounts better?

[BIG WOOD]

There isn’t any blockage

It’s called a 410everest blower trying to suck air through 1, 2” hose.

If I had a 4” hose laying on the ground, it would probably be around 6hg

 

[BIG WOOD]

Which is why I need my hg set around 14-15

 

[BIG WOOD]

You probably have a blockage somewhere.

You probably have a leak somewhere

 

[Mikey P]

move the truck.
You're parked on the hose...

it's been so long since I spun a blower, but memory suggests 100ft of open 2" hose was around 6-7 hg
(45 spun @3200 rpm)


..L.T.A.

He probably has his APO dump hose hooked to the blower inlet.

 

[BIG WOOD]

There goes another kick to my crotch

 

[BIG WOOD]

Where’s Damon?

Hey Damon, go do a stupid test and show us what your hg is with 100ft of hose hooked up.

These guys with the little gas powered rug dr machines think they have suction

 

[Mikey P]

Where’s Damon?

Hey Damon, go do a stupid test and show us what your hg is with 100ft of hose hooked up.

These guys with the little gas powered rug dr machines think they have suction

Ill bet you $5000 my HWE'd carpets dry quicker than yours...


And are just as clean.

 

[FB7777]

100ft of hose without the wand attached.

View attachment 116135

I don’t know what machine you are running , but 8 hg on an open 2 inch 100’ hose run is a little high for a 47 blower

is your blower filter clean?

 

[Hack Attack]

move the truck.
You're parked on the hose...

it's been so long since I spun a blower, but memory suggests 100ft of open 2" hose was around 6-7 hg
(45 spun @3200 rpm)


..L.T.A.

my 36 unit spinning at 3400 is similar

haven't played with 575 yet.. sigh

 

[Hack Attack]

Where’s Damon?

Hey Damon, go do a stupid test and show us what your hg is with 100ft of hose hooked up.

These guys with the little gas powered rug dr machines think they have suction

providing the filters are clean the hg shows the vacuum in the whole system, as vacuum increases your cfm goes down

dont know what your blower spins at? But prob pulling 400+ cfm around 8" but below 370 cfm around 14" looking at specs for 410 around 2600 rpm

 

[Nomad74]

You probably have a blockage somewhere.

I have a blockage

 

[Nomad74]

Where’s Damon?

Hey Damon, go do a stupid test and show us what your hg is with 100ft of hose hooked up.

These guys with the little gas powered rug dr machines think they have suction

Matt, I just saw this. Been working my tail off. Taking off for a week camping. It was a great day. Lots of big checks came in. We eat steak tonight.

 

[Nate The Great]

I have a blockage

Baconators...

 

[BIG WOOD]

Ill bet you $5000 my HWE'd carpets dry quicker than yours...


And are just as clean.

you live in negative humidity. I remember someone else telling me he could get awesome dry times with his 33 blower after running 400ft of hose in Nevada. You live in the Fooking desert!

 

[Mikey P]

you live in negative humidity. I remember someone else telling me he could get awesome dry times with his 33 blower after running 400ft of hose in Nevada. You live in the Fooking desert!

You choose to live in a swamp, deal with it.

 

[Dolly Llama]

you live in negative humidity. I remember someone else telling me he could get awesome dry times with his 33 blower after running 400ft of hose in Nevada. You live in the Fooking desert!

be thankful he didn't buy that open porty on a dolly cart he considered for a minute before moving to Dead Brush

we'd be hearing you don't need anything bigger for billionaires and ranch widows


..L.T.A.

 

[Mikey P]

be thankful he didn't buy that open porty on a dolly cart he considered for a minute before moving to Dead Brush

we'd be hearing you don't need anything bigger for billionaires and ranch widows


..L.T.A.

30 seconds

 

[Dolly Llama]

be thankful he didn't buy that open porty on a dolly cart he considered for a minute before moving to Dead Brush

speaking of that goofy set up..

what ever happened to that guy?
Did he sell any of them after you stopped talking about them?


..L.T.A.

 

[Mikey P]

speaking of that goofy set up..

what ever happened to that guy?
Did he sell any of them after you stopped talking about them?


..L.T.A.

I think he moved from CO to NY, no idea if he still leases those things out to hotels

 

[KevinD]

100ft of hose without the wand attached.

View attachment 116135

Could also be the brand of vacuum hose. Some have a smoother bore and are less restrictive.

 

[DAT]

I remember Tom saying that his custom machine is always at 10hg-11hg, and gave good explanation about it why that isn't necessarily a bad thing.

 

[Cleanworks]

I have a blockage

Soft chews.

 

[SamIam]

So would a 47 blower set at 17hg be a night a day difference compare to 47 at 14

On your wrists also the 405 had a governor and adjust throttle to load.

Most machine over come this by running higher rpms and fuel consumption

 

[SamIam]

I remember Tom saying that his custom machine is always at 10hg-11hg, and gave good explanation about it why that isn't necessarily a bad thing.

Prevents lockdown

 

[SamIam]

move the truck.
You're parked on the hose...

it's been so long since I spun a blower, but memory suggests 100ft of open 2" hose was around 6-7 hg
(45 spun @3200 rpm)


..L.T.A.

That's why masterblend uses a 1 1/2 inch hose and gets 10 on a open hose run.

#restriction

 

[SamIam]

I have a low mileage Chevy express sitting after my Everest was stolen out of it and I replaced it with a complete unit (butler)

Lately I’ve been needing another unit

I am looking for a 45 or 47 blower machine

The steamaction machines seem nice and even though I said I wouldn’t buy one because I heard half the story of a problem a customer had I would now knowing they did make it right

My buddy bought one with the 6008 blower and says it’s insane and he cleans mostly on idle and he says it makes his Everest hp seem weak he tells me he loves it and would buy another unit from them

So my question is a similar size blower ran around 13-14 hg vs steamaction 16-18hg what will be the difference as far as dry times and performance

Ps tell Renaldo to quit banging Paul.

16 to 18 hgs equal carpel tunnel

 

[SamIam]

And don't forget to limit yourself to really small jobs.

Got a $3k job on the 2nd. I better eat my Wheaties.

Or bacon

 

[SamIam]

Which is why I need my hg set around 14-15

I demoed the everest with two prochem ti and both on 50 ft hose run albeit a crappy carpet to clean.

Heats great.

Didn't believe it was worth the extra money.

But then I got a pro1200se so there's that.

It's great lots of suck.

 

[BIG WOOD]

I demoed the everest with two prochem ti and both on 50 ft hose run albeit a crappy carpet to clean.

Heats great.

Didn't believe it was worth the extra money.

But then I got a pro1200se so there's that.

It's great lots of suck.

A 150ft double hose run would be more accurate

 

[SamIam]

A 150ft double hose run would be more accurate

Yeah but if I wasn't excited at 50 lol