How do you clear clogged jets on your Hoss?

Johnny

Supportive Member
Joined
Oct 22, 2006
Messages
2,375
Location
La-Z-Boy
Name
Johnny
And keep them clear? I've been plucking bristles from steel brushes with my Leatherman.
 

Johnny

Supportive Member
Joined
Oct 22, 2006
Messages
2,375
Location
La-Z-Boy
Name
Johnny
Find the source of the crud and install an inline filter


Ours never plugs.

It should have come with one?
I keep the stock filter clean. Suspected the encap component of End Zone, but my other rinse tools don't clog with EZ.
 

GeneMiller

Member
Joined
Mar 24, 2009
Messages
3,547
Location
Boca Raton
Name
gene miller
100 mesh filter. I would pull the disc and turn up the pressure and try to blow it out first. I hope mine never clogs. I have had to replace the filter when they get clogged with encap rinse. Never a jet yet.

Gene
 
  • Like
Reactions: Johnny

Mike Draper

Member
Joined
Jan 13, 2008
Messages
4,402
Always make sure your water is nice and soft and you'll never have a clog again. You should cleaning with soft water and a rinse.
 

Louis

Supportive Member
Joined
Dec 11, 2006
Messages
1,251
Location
Modesto, CA
Name
Louis
A shark brush or stainless brush. A tiny bit of crud that dries on them will plug them. I have 2 inline filters on mine and they still plugged . Quick brush and your back in Business. I have been running mine with no disk in it and it cleans great. The needle valve is going on next.
 
  • Like
Reactions: Mikey P

Total_Rookie

Member
Joined
Jan 28, 2013
Messages
537
Location
Beaumont, CA
Name
Joseph Torrez
Consistently or one or two times atnyour house?


You live down in the So Cal desert, right?
Humidity does factor an offset at times. Although most of the times its dry climate here.

All jobs have follow up calls within 48 hours. We ask how long it took to dry.

We have our carpets cleaned once a year. Just use the wand, dry in 2 hrs
 

bob vawter

Grassy Knoller
Joined
Sep 15, 2007
Messages
44,242
Location
La La Land
Name
bob vawter
from my own experience i found that most of the time it's small shards of rubber from QD O-rings...
take the jet off put on yor extra jet that you carry in yor pocket and then blow the clogged one out backwards when ya get home
 
  • Like
Reactions: Mikey P

Latest posts

Back
Top Bottom