Is my rinse a bit too strong?
- Thread starter BIG WOOD
- Start date
@Larry Cobb
Is this normal for my male connector to look like this? This is the first time I"ve seen this using an acid rinse
Is this normal for my male connector to look like this? This is the first time I"ve seen this using an acid rinse
hogjowl
Idiot™
"3 glugs"
Just be happy you never use Flex.
Cleanworks
Moderator
Try using a measuring cup. It's just like a regular cup but it's has little lines and numbers on it
The directions say to use a quart. I think that's too much. 3glugs is just right
Russ T.
Supportive Member
The only way for you to tell if you're mixing too strong is if you start measuring and go from there.
I put a couple "glugs" of deodorizer in my rinse but that's a little different. You should be mixing the rinse close to the directions in my opinion.
I put a couple "glugs" of deodorizer in my rinse but that's a little different. You should be mixing the rinse close to the directions in my opinion.
Russ T.
Supportive Member
Just descale the machine and start measuring.
Is it a acid?
I use an emulsifier on carpet. I've heard it's much easier on my expensive equipment.
Is it a acid?
I use an emulsifier on carpet. I've heard it's much easier on my expensive equipment.
Yeah, it's acid
This is boring to me. Can we get back to making fun of your trailer?
Looks good. Have you thought about tongue and groove at all?
Your goofy ass log cabin van
This plywood is thick compared to my trailer walls. I've got plenty of wood to anchor a screw to
The frustrating thing is gonna be where to put everything
hogjowl
Idiot™
Was it the Castex wand that convinced you of this?
Or was it the Zep cleaner?
Cleanworks
Moderator
What goes wrong is that you will be leaving too much product in the carpet causing it to resoil quickly
Mikey P
Administrator
Just be happy you never use Flex.
I have three trucking using it since it's inception, god only knows how much.
You used it for what, a week?
Operator error?
Mikey P
Administrator
Lmao!
I used it long enough to watch all my fittings form a white crust. Plus the stuff smells like old feet. But if you like it, who cares what I think. I'm just here for the food.
I have a case of flex fire I'm slowing working through. I rotate it with my other stuff so it doesn't crust everything up. It works good and smells better than Ice, like watermelon , but still crusts things up.
I'm cutting a hole today or tomorrow, and taking it to be installed this thursday
Dolly Llama
Number 5
what's it do?
and if you say resoil faster, I'm going to puke on your shoes
some of the acid rinses resoil worse than some of the alkaline detergents
..L.T.A.
Too high of a ph makes the carpet crispy and stiff if it isn't neutralized.
Mikey P
Administrator
A buddy of mine is house shopping here.
We looked at a place yesterday with a white poly pile that had just been "cleaned"..
Wicking, Browning, pee spots that should have came up, stinky...
No acid rinse going on for sure
Or dry strokes
Or pre vac...
Or a redo I'm betting
We looked at a place yesterday with a white poly pile that had just been "cleaned"..
Wicking, Browning, pee spots that should have came up, stinky...
No acid rinse going on for sure
Or dry strokes
Or pre vac...
Or a redo I'm betting
