My recently acquired Thermalwave

[Becker]

gets installed Dec 11th.

So, I use and like my 2" 2 jet wand.

I'll be looking for a new wand soon.

But in the mean time.

What sized jet for a 2 jet wand do you use?

 

[KevinL]

That's going to depend on how wide the wand is and how high off the floor the jets are. I'd say 110 is a good place to start. What's on it now?

 

[Becker]

Yeah. Was not the angle I was concerned it. Rather gallons per.

 

[Able 1]

Go with .04 or .05's..

 

[Lee Stockwell]

The tips are cheap. I keep a variety in my plumbing box. Change out is under a minute.

 

[Larry Cobb]

So, I use and like my 2" 2 jet wand.

I'll be looking for a new wand soon.

But in the mean time.

What sized jet for a 2 jet wand do you use?

Becker;

If it is a 12" wand, then I would try #11003 stainless jets.

If it is a 14" wand, then I would try #11004 stainless jets.

Pump pressure set @ 500 PSI spraying.

Larry

 

[Chris A]

I use 04's for the 2 jetter that's with my Boxxer, heat retention is really good. Seems to clean really well although I don't use it much.