F
FB7777
Guest
Yes
No Saiger
- Thread starter Mikey P
- Start date
Papa John
Lifetime Supportive Member
but 570 are illegal in CA, but not sure if it matters.
darcie smith
Member
I’ll have Scott call you. I just got back from my second trip in two months so I don’t have a leg to stand on asking to go somewhere else. Disney World was amazing
Mikey P
Administrator
Not an advertiser
F
FB7777
Guest
Here’s a beat up Steamaction for cheap. Looks like it has some good parts. Looks like Steamaction is the one selling it.
Used Steamaction S.A.M. II truckmount carpet cleaning machine for Parts | eBay
Used Steamaction S.A.M. II carpet cleaning machine. T his machine is for parts or can be put back together.
www.ebay.com
Last edited:
Mikey P
Administrator
Abs
Absolutely
Mikey P
Administrator
Bring it on Miller
You really are Satan.
You expect Scott and Darcie to want to hang out with Steamaction guys and work for free while back home they're losing money due to a bad machine and bad customer service telling them to take it to a lawnmower shop? You really think they want to be there?
Can I buy a ticket to the cage match?
Edit, Maybe you're an Angel and SA will step up.
Last edited:
F
FB7777
Guest
Sam Miller is actually a very decent guy I don’t agree with how he lambasted you and questioned your integrity but that’s not what I am doing
but I’m familiar with your tactics
Steam Action will be attending Phoenix fest with the intent of selling machines
you’d have to be a moron to not monetize that opportunity so I am certain they are paying to play
totally expected , heck I spend thousands on taking care of my decision makers
They are “sponsors “ of the event , you just made an announcement that Steam Action will be demoing units
if that goes well , Sammy coughs up some coin to advertise
get it Paytoplay?
Listen old friend, I get that we are no longer comrades and frankly could give less than two shits
My bug juice spraying and your dancing around appeasing monetary interests are two sides of the same ‘respect” coin
but I’m familiar with your tactics
Steam Action will be attending Phoenix fest with the intent of selling machines
you’d have to be a moron to not monetize that opportunity so I am certain they are paying to play
totally expected , heck I spend thousands on taking care of my decision makers
They are “sponsors “ of the event , you just made an announcement that Steam Action will be demoing units
if that goes well , Sammy coughs up some coin to advertise
get it Paytoplay?
Listen old friend, I get that we are no longer comrades and frankly could give less than two shits
My bug juice spraying and your dancing around appeasing monetary interests are two sides of the same ‘respect” coin
hogjowl
Idiot™
Oh my
Mikey P
Administrator
You might as well have told people I'm a big ugly 7 ft tall dork, it would have been more shocking..Sam Miller is actually a very decent guy I don’t agree with how he lambasted you and questioned your integrity but that’s not what I am doing
but I’m familiar with your tactics
Steam Action will be attending Phoenix fest with the intent of selling machines
you’d have to be a moron to not monetize that opportunity so I am certain they are paying to play
totally expected , heck I spend thousands on taking care of my decision makers
They are “sponsors “ of the event , you just made an announcement that Steam Action will be demoing units
if that goes well , Sammy coughs up some coin to advertise
get it Paytoplay?
Listen old friend, I get that we are no longer comrades and frankly could give less than two shits
My bug juice spraying and your dancing around appeasing monetary interests are two sides of the same ‘respect” coin
Mikey P
Administrator
You're off on one though comrade, take a look at our advertisers here, is there one that I wouldn't endorse and use myself, other than the piss products?
F
FB7777
Guest
So I’ll keep spraying and you keep dancing….
Scott went viral , Steam Action is paying to be in Phoenix
Paytoplay becomes the hero by setting up the meet in Arizona
all for free cause you’re a martyr
All hail Satan
Scott went viral , Steam Action is paying to be in Phoenix
Paytoplay becomes the hero by setting up the meet in Arizona
all for free cause you’re a martyr
All hail Satan
Desk Jockey
Member
You don't look close to 7-ft tall. Big ugly & dork? Closer that the 7-ft.
Desk Jockey
Member
What most of us are thinking is you should be going to bat for Darcie & Scott since you're pimping their products here and at MF. (Subpar products)
I think I’ll be nice for the rest of the week.
Desk Jockey
Member
Pussy!
F
FB19087
Guest
Trip Moses
IMOL
The 570 is the standard for all machines to be compared too. 2300 hours on mine. Replaced a pressure gauge, bypass screen and a chem pump diaphragm. That’s it. I run it hard a hell. It just keeps getting up. Looking forward to getting my new one next week. I’m going to pull the old one and have gone through and get it ready for service in the spring.
F
FB7777
Guest
Seeing how I can’t secure a new GM van until 2022 , I invested $3,000 in my 2005 Butler this week to keep her going until the “chip shortage” becomes a chip surplus
it’s like the housing boom right now…. No point in getting bent over and paying premium PLUS for machines and vans
I’d love the write-off, but I ain’t paying 15% over traditional market t0 get it
it’s like the housing boom right now…. No point in getting bent over and paying premium PLUS for machines and vans
I’d love the write-off, but I ain’t paying 15% over traditional market t0 get it
F
FB7777
Guest
Funny….
Mike and I have always considered you our intellectually impaired older brother
darcie smith
Member
Mikey has been very supportive through the issues we’ve had. From what I understand, and I don’t understand much of anything mechanical, is that there’s a valve that’s supposed to keep the machine from overheating. That valve was faulty, the machine overheated, and cooked the engine and everything behind it. Sammy sent replacement parts, paid for repairs, and sent a tech out to us for an entire weekend when the shop we took it to couldn’t get it right. Even after all that, there are still problems, probably due to the original issue. I can’t say Sammy hasn’t tried to make it right, but Scott’s point is it should have been mechanically sound in the first place and we’re about to make our third payment on a setup that worked about a week and a half since July 19. So that’s the story if you aren’t in Scott’s Facebook group… I mean, I think that’s the story…
darcie smith
Member
That’s exactly it, Damon. Nail on head. We can’t afford to take the time off, as much as I’d enjoy hanging out with all of you.
Desk Jockey
Member
I don't do Facebook so this is the first I've heard of it.
Any machine can have trouble we work them hard. They sit inside hot vans and get abused.
However a new unit shouldn't have issues right from jump. When it happens I would expect a distributor or in this case manufacturer to do everything in their power to make good.
Those units go for a huge pile of cash, I would expect it to run flawlessly at least for a couple years.
Any machine can have trouble we work them hard. They sit inside hot vans and get abused.
However a new unit shouldn't have issues right from jump. When it happens I would expect a distributor or in this case manufacturer to do everything in their power to make good.
Those units go for a huge pile of cash, I would expect it to run flawlessly at least for a couple years.
Last edited:
darcie smith
Member
Yes, exactly
hogjowl
Idiot™
You should “do” FB Rechurd.
Latest posts
-
-
-
What is your biggest regret in your cleaning business and...
- Latest: Kenny Hayes
-
-
-
-
-
-
-
-
