OPTIMUM!!!!!

[Kenny Hayes]

My Orbot Vibe cord is just fine

Mine too! Even with chimps using it.

 

[hogjowl]

It amazes me how people do the "arm wrap" with their cords and water hoses.

You’re easily amazed I see

 

[steve_64]

They should have told you to stop wrapping it around your arm....

Solid core extension cords have a built in twist. When they get hot the outer wrap acts like shrink wrap and tightens up exposing the twist.
It doesn't hurt anything just ugly.

 

[Dolly Llama]

wrapping/coiling from plug back to machine is what twists them.
Unplug and coil at the machine.
the plug end roll/turn on the way to machine

..L.T.A.

 

[Hack Attack]

you can coil from either end just dont twist it

for those that struggle make tails

 

[hogjowl]

Rude

 

[Nate The Great]

you can coil from either end just dont twist it

for those that struggle make tails

I like the over, under technique.. Gets memory and doesn't for the most part twist.. Although the RV360XL OG cord would twist bad, so I just used a heavier gauge cord and problem solved..

Arm-coilers make me cringe.. By all means do your own hoses and cords, don't do mine like that..

 

[Cleanworks]

I like the over, under technique.. Gets memory and doesn't for the most part twist.. Although the RV360XL OG cord would twist bad, so I just used a heavier gauge cord and problem solved..

Arm-coilers make me cringe.. By all means do your own hoses and cords, don't do mine like that..

I always use the over under as well. No twist and fast to coil. I replaced my Trinity cord with a heavy duty one.

 

[Hack Attack]

I like the over, under technique.. Gets memory and doesn't for the most part twist.. Although the RV360XL OG cord would twist bad, so I just used a heavier gauge cord and problem solved..

Arm-coilers make me cringe.. By all means do your own hoses and cords, don't do mine like that..

my RV360i I bought 2nd hand with cord all twisted to hell.

replaced it with old extension lead

 

[Nate The Great]

I always use the over under as well. No twist and fast to coil. I replaced my Trinity cord with a heavy duty one.

For what the cost of those machines, you'd think the cord would be a heavy duty one from the factory.. My Orbot Vibe came with a heavy duty cord.. I just not like the twist plug connection..

 

[Cleanworks]

For what the cost of those machines, you'd think the cord would be a heavy duty one from the factory.. My Orbot Vibe came with a heavy duty cord.. I just not like the twist plug connection..

My Sprayborg has the same heavy cord. Easy to coil and no twist. The other thing Trinity needs to do is enlarge the holder for the jug. 1/4 inch wider and 3 inches higher.