daniel@procarpet
Member
- Joined
- Sep 7, 2008
- Messages
- 3,797
I am going to order glides for my RX-20 HE and a holed glide for a prochem 4 jet wand. I actually have 2 quadjet wands. One is being used with the LEGEND XL and the other quadjet wand will be used with the EVEREST. The problem I am having is that the jets are not evenly spaced on the quadjet which causes bad streaking on low level commercial carpet. There is a gap between the middle jets (95015). I cleaned a restaurant the other day which I had been using the RX on and had really bad streaking. After looking at the spray pattern and feeling with my hand, the area between the middle two jets has almost no water pressure.
Can I replace the two middle jets on the wand that I use with the Legend XL so there is a wider spray pattern, or will doing so cause an uneven clean?
The RX cleans good, but it takes a lot longer than using the wand.
Can I replace the two middle jets on the wand that I use with the Legend XL so there is a wider spray pattern, or will doing so cause an uneven clean?
The RX cleans good, but it takes a lot longer than using the wand.