Question

[WillH]

Does anyone have a personal number for rick at excellent supply? I just bought a crb and I'm in the middle of a job and it stopped working.i have a couple of questions and the just closed.This is my first time useing it thanks.

 

[FB19087]

have you tried the "text" number on the site? Matbe text get answered after hours...idk


727.330.0794

 

[SamIam]

I got one that had a bad cord you could feel near where the cord attached to machine if it feels like it's pulled out over the sleeve it probably needs replacing or try another extension cord

 

[SamIam]

They're dropped shipped from
@regarossa maybe he can help?

 

[WillH]

i checked the cord. No problem i can see. I got another cord and still nothing.I also just texted them. Thanks for the help

 

[Mark Saiger]

Any Chance something got caught in the brushes?

Or maybe with stiffer brushes on....will giving it a push help to get it moving?

Or, is the circuit you are on, blown a fuse?

Just putting out some things have happened to us in the past....

Or, check the little circuit breaker button on the side of the unit while it is plugged in to see if popped out

 

[WillH]

It Just suck because it's my first job ever and I just put down a hole bunch of product To

 

[WillH]

Thanks guy for your help it was the little breaker button on the side of the machine. What a relief. Thanks again mark. My next question was going to be about a breaker. Have a good new year guys

 

[WillH]

What do you think could of caused that?

 

[Jimmy L]

Overload on the brushes. What brushes are you using?

 

[Mikey P]

PM sent

 

[Larry Cobb]

Probably just the new brushes drawing more current.

A couple of jobs will break them in and lessen the load.

 

[hogjowl]

PM sent to Jimmy.

 

[Lee Stockwell]

Where else can you get the answer in under 30 minutes?

 

[dealtimeman]

Technically Facebook live or Snapchat or beam or FaceTime with mark saiger.

 

[SamIam]

I'm sure someone said when you start it if the brushes don't spin give it a lift

 

[dealtimeman]

A nice little rocking action gets it going smoothly

 

[Desk Jockey]

You boys and yor toys.

You could have bought Cimex for just a little more change.

 

[steve_64]

You boys and yor toys.

You could have bought Cimex for just a little more change.

It voids some warranties.

It doesn't fix fiber damage the. Way the crb does neither

The 10 in needs a tug when you lower the handle every time almost.

 

[Desk Jockey]

lol
just pokin. Its whut I do.

 

[Old Coastie]

Any CRB starts easier if you tilt it a little, sideways. Those bristles embed into the carpet and the initial drag is high. Tilt it, start it, let it down and you can rock n roll.