Remove and Replacing a cat water pump in our Butler

[Mark Saiger]

One of our Cat Water pumps developed an oil leak.

Step by step follow along movie removing and replacing a cat water pump in one of our Butler Truckmounts today

(Marty...you will not make it through all of this video )

 

[hogjowl]

You're correct

 

[Bob Pruitt]

These videos are very helpful for Butler Owners. Honestly they should be available on the Butler website.

 

[dealtimeman]

Very good play by play

 

[Steve Lawrence]

I've had to R and R a Cat Pump in a Butler once. Took about 3 hours. Not too bad. Would have taken much longer with one of my old Prochems.

 

[Mark Saiger]

You're correct

 

[The Great Oz]

Start a technical video production company and hire yourself out to manufacturers. Really. No one has the staff or time to do this.

If you're just in it as a hobby, show how to replace a Cat with a GP Emperor. Then you 'd really be doing Butler owners a favor.

 

[dealtimeman]

Start a technical video production company and hire yourself out to manufacturers. Really. No one has the staff or time to do this.

If you're just in it as a hobby, show how to replace a Cat with a GP Emperor. Then you 'd really be doing Butler owners a favor.

It would be the same procedure just have to check specs of clutch relative to Ww here cat pump clutch sits now. SLO's may need to change belt size.

 

[todg]

These videos are very helpful for Butler Owners. Honestly they should be available on the Butler website.

I was thinking the same thing...as a matter of fact, Butler could use a good rep...I mean seriously, Mark knows his machinery and should be paid double for working half the amount of time he is currently working. He can make Butler HUGE... Wish he was in Vegas,,,As a matter of fact I hope he knows someone who could deliver me a butler in about a year or so...

 

[Bob Pruitt]

I was thinking the same thing...as a matter of fact, Butler could use a good rep...I mean seriously, Mark knows his machinery and should be paid double for working half the amount of time he is currently working. He can make Butler HUGE...

I bet there are a hundred Butlers running out there because of Mark's videos. I never even considered Butler until I watched a few of Marks videos and the fact that you can upgrade the standard vacuum and heat. I think the upgraded Butlers should be the Standard Butlers but what do I know.

 

[Bryan S. Bennett]

Great and helpful video Mark. Did they warranty the pump? Btw, they did replace the 150' solution hose that was getting pinholes.

 

[Mark Saiger]

Great and helpful video Mark. Did they warranty the pump? Btw, they did replace the 150' solution hose that was getting pinholes.

They will be getting the old pump in couple days but think it will be under warranty.

Think was just in the manufacturing moment. Someone might have tapped too far into the casing.

But, they of course need to be able to look it over

 

[Mikey P]

Start a technical video production company and hire yourself out to manufacturers. Really. No one has the staff or time to do this.

If you're just in it as a hobby, show how to replace a Cat with a GP Emperor. Then you 'd really be doing Butler owners a favor.

get a tri pod and head came


I recently watch a Bob Foster video that was 85% him complaining that he couldn't hold the camera while showing the viewers how to use a hand tool.

 

[hogjowl]

The only possible reason you would sit through a Foster video would be so you could make fun of him.

You egocentric bas&$rd.

 

[dealtimeman]

If we keep calling him out on stuff, he is going to get frustrated with us.

 

[Bruce Humphrey]

That would be the "Only" reason to watch a Foster video, the guy was such a goober.

 

[SamIam]

You're correct

I got about 10 minutes in and thought I'm
glad I don't have a Butler.

 

[SamIam]

I've had to R and R a Cat Pump in a Butler once. Took about 3 hours. Not too bad. Would have taken much longer with one of my old Prochems.

Reaalllllyyyy?

 

[dealtimeman]

The old prochems take only a half hour as long as there is not a bulk head on the van. One of the easiest pumps to replace.

Even some of the new ones can be changed in a half hour or so.

 

[SamIam]

Take 2 hoses off the chemical pump, spin chemical pump off pump. take 4 mounting screws off pump. Slide forward take belts off. Lift pump out?

I guess the harder part would be R&R the clutch plate?

The good news is I've only had to rebuild 2 cat pumps in 15000 hours so I guess they're pretty solid.

But ya it looks easy enough I'm sure a Butler owner appreciates the video.

 

[hogjowl]

Maybe

 

[jwfoulk12]

Take 2 hoses off the chemical pump, spin chemical pump off pump. take 4 mounting screws off pump. Slide forward take belts off. Lift pump out?

I guess the harder part would be R&R the clutch plate?

The good news is I've only had to rebuild 2 cat pumps in 15000 hours so I guess they're pretty solid.

But ya it looks easy enough I'm sure a Butler owner appreciates the video.

And I thought I was doing well getting 6000 hours out of mine.

 

[Mark Saiger]

If wasn't making this video could have done in about half the time actually...

But I can twirl some wrenches when I need to

 

[hogjowl]

Yeah, me too.

 

[Mark Saiger]

Yeah, me too.

I've witnessed that

 

[Russ T.]

Any word on whether Chevy will continue cranking their faithful work van out?

 

[hogjowl]

Saiger" data-source="post: 4474838" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

I've witnessed that

Don't be a smart ass!

 

[Mark Saiger]

Don't be a smart ass!

 

[Mark Saiger]

Any word on whether Chevy will continue cranking their faithful work van out?

Still a go for sometime yet....because, no one else is offering a platform like it....so they are selling a bunch yet I guess....

 

[Brian H]

It's a lot easier to work on the pump if you get everything else out of the way.