REPLACEMENT 3 STAGE VAC MOTOR

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,250
Location
Ne
Name
Jimmy L
Picked up a very cheap portable and it has a tired 3 stage vac motor. What vac motor to buy somewhere that has a good price. 5.7 inch 3 stage
 

Papa John

Lifetime Supportive Member
Joined
Aug 19, 2013
Messages
6,972
Location
San Francisco, CA.
Name
John Stewart
Mytee.com offers 2 such types vacuums. 2 different CFM rates and 2 different electrical power requirements.

They maybe cheaper from your local dealer instead of direct from Mytee.
 

Cleanworks

Moderator
Joined
Oct 22, 2012
Messages
27,866
Location
New Westminster,BC
Name
Ron Marriott
If it is the only vacuum motor look for a 13.8 amp replacement. This will give enough amperage to run an aquatech 220 psi diaphram pump which will give you 160 psi on a 4 flow wand
 

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,250
Location
Ne
Name
Jimmy L
want one of them new higher cfm low amp ones.
Actually it's on a old castex walkbehind extractor and has a 100 psi pump.
 

ruff

Member
Joined
Apr 19, 2007
Messages
11,010
Location
San Francisco, CA
Name
Ofer Kolton
40877.jpg
 
  • Like
Reactions: hogjowl

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,250
Location
Ne
Name
Jimmy L
Larry will the higher amps 10 vs 13 affect the machine in any way? Causing it to shut down? It's one of those 10 gallon castex walk behinds. 3 stage vac and a 100 psi pump.
 

Jimmy L

Member
Joined
Oct 7, 2006
Messages
15,250
Location
Ne
Name
Jimmy L
I will use it to rinse those areas like hallways deep inside a building where I can't get to with my TM. And have bonnet cleaned them for years. Just a rinsing machine probably only using a diluted vinegar solution so as to NOT plug up the jets if left unused for a time. I call it my "Rinse and Clean" method to remove those ENCAPSULATION scampoo RESIDUES. Forget all that BS about being able to vacuum that crap out.
 

Papa John

Lifetime Supportive Member
Joined
Aug 19, 2013
Messages
6,972
Location
San Francisco, CA.
Name
John Stewart
  • Like
Reactions: Jimmy L

Larry Cobb

Member
Joined
Oct 7, 2006
Messages
5,795
Location
Dallas, Texas USA
Name
Larry Cobb
Larry will the higher amps 10 vs 13 affect the machine in any way? Causing it to shut down? It's one of those 10 gallon castex walk behinds. 3 stage vac and a 100 psi pump.

I think the more powerful vac will make a new machine out of it.
I wouldn't worry about the amp draw in your Castex.
 
Back
Top Bottom