Sapphire 370ss heat issue

[Jason Foster]

I crank the mount full throttle for five minutes
im up to 280 degrees piping hot
Add water pressure , heat immediately drops to luke warm

 

[Jason Foster]

Please help me fugure out why my mount goes from 280 degrees to luke warm once i cut on water pump

 

[Justin Legend Brands]

I crank the mount full throttle for five minutes
im up to 280 degrees piping hot
Add water pressure , heat immediately drops to luke warm

Give me a call. 253-651-3468.

 

[Glynn]

Get a Titan 575

 

[Jimmy L]

Sounds like it's over heated and empties into the waste tank.

 

[Jim Martin]

On the side of the machine there is a orifice and a filter screen.. Take both out and make sure they are clean... That's the first place I would start...

Clean and grease the bimba valve shaft... Make sure it is moving freely...

 

[Mikey P]

I don't know I get the impression he's just opening up the heat exchanger wide-open and of course the temperature will drop rapidly you have to know how the baby heat exchangers on these smaller machines to get max heat performance

 

[Jim Martin]

What I am understanding is that the machine is just sitting there with no pump on and generating heat and when he turns the pump on.. And the water starts moving.. Its going to be cooler because there is a difference between the water sitting and heating... And water moving and heating.. But that being said.. I would it think it would be a bit warmer than he is describing... So something may be obstructing the flow

 

[hogjowl]

What’shisface told him to call him
Why are you retards still discussing it?

 

[Trip Moses]

Generally, people just don’t take the time to understand how their machines work. Read the manual.

 

[Kenny Hayes]

I would think he would call what’s his face in the first place and skip the board.

 

[Jimmy L]

Initial built up heat in the exchangers and then when the pump started it depleted. Next time turn the pump on too and it will recirculate and keep temps up

 

[Jason Foster]

iv

Generally, people just don’t take the time to understand how their machines work. Read the manual.

ive read the manual and ran this machine for yers thanks
i started with the screen n orifice

 

[Jason Foster]

Legend Brands" data-source="post: 4701015" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

Give me a call. 253-651-3468.

ty
ill call u in a couple hours
im in michigan unless youre up now

 

[Justin Legend Brands]

ty
ill call u in a couple hours
im in michigan unless youre up now

I'm up, and working. Call whenever.

 

[Trip Moses]

iv

ive read the manual and ran this machine for yers thanks
i started with the screen n orifice

I see, it’s not a new machine. That wasn’t clear from the original post. Let us know what you and Justin figure out.

 

[Jim Martin]

Was this ever figured out.....?????

 

[Mikey P]

he never called me...

 

[hogjowl]

He wasn’t looking for a glide

 

[Dolly Llama]

Or a bonzer...yet

..LTA.

 

[Mikey P]

I've learned that the non anodized head is corroding internally when used with an acid rinse which causes constant jet plugging which greatly reduces my boner for the Bonzer

 

[Justin Legend Brands]

Was this ever figured out.....?????

His Bimba was stuck.

 

[Lee Stockwell]

Dealing with a bimba is a great trade-off for not dealing with previous exhaust diverters and related solenoids and plumbing.

 

[BIG WOOD]

Legend Brands" data-source="post: 4701931" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

His Bimba was stuck.

Why did you guys choose the bimba over the manual diverter that’s on the prochem apex and Everest?

 

[DAT]

Dealing with a bimba is a great trade-off for not dealing with previous exhaust diverters and related solenoids and plumbing.

Like my TM Boxxer 423s? It uses exhaust diverter. Any problems might it arise ?

 

[Nomad74]

Why did you guys choose the bimba over the manual diverter that’s on the prochem apex and Everest?

Because thats how they make them.

 

[BIG WOOD]

Because thats how they make them.

They had a choice on which one to choose and i was wondering why they chose that route

 

[Nomad74]

They had a choice on which one to choose and i was wondering why they chose that route

Been three years plus for me. Never had any issues with my Bimba. Not sure what all the fuss is about. I’ve never even lubed it.

 

[Lee Stockwell]

I'll explain

 

[Joeytechman]

Bimba / diverter systems= better temperature control, more complexity to system.
Manual damper control= less temperature control, simpler system. With a manual damper it is not unusual to see your solution temperature have very high spikes if not moving water through the system.