Slop & Gobble

BLewis

Supportive Member
Joined
Jun 17, 2008
Messages
1,693
Location
Lexington
Name
Billy Lewis
Thanks Les for the sample.
Here are a couple pics of results tonight. This restaurant was 11 days overdue, due to the V being in the shop. Just got her out today and have been running like mad trying to catch up. Did 3 restaurants tonight and these were the best shots. I was very impressed with Les' product.

SlopGobble003.jpg


SlopGobble001.jpg
 

Bob Foster

Member
Joined
Oct 8, 2006
Messages
8,870
Jamesh921 said:
Jeremy,
How many ozs do you recommend to mix in a HydroForce if the HF is metered at;

1:4

and

1:9

Thanks.


4:1 for a heavily soiled carpet 10 scoops (5 tablespoons) in a standard 5 quart hydroforce
for a normal soiled carpet 5 scoops (2.5 tablespoons) in a standard 5 quart hydroforce
Because spraying out the entire contents of a 4:1 hydroforce puts 5 gallons of fluid on the carpet and the heavy soiled RTU recommended is 1 teaspoon (2 scoops) per RTU gallon or

for normal soiling with a 4:1 hydroforce the RTU suggested dilution is 1/2 a teaspoon (1 scoop) for each RTU gallon

1:9 for a heavily soiled carpet 18 scoops (9 tablespoons) in a standard 5 quart hydroforce
for a normal soiled carpet 9 scoops (4.5 tablespoons) in a standard 5 quart hydroforce

A hydroforce that is a 1:9 needs to have about double the concentration of juice in the hydroforce tank to do the same as a 1:4 hydroforce.

Confused? Well its important to know this stuff.
 

Jeremy

Member
Joined
Oct 9, 2006
Messages
3,720
Location
Indiana
Name
Jeremy
Metered at 4-1: 4-5 oz per 5 qt resivior
Metered at 9-1: 10-12 oz per 5 qt resivior

I think... Bob confused me. :lol:
 

Bob Foster

Member
Joined
Oct 8, 2006
Messages
8,870
REalLY? :lol: The dilution you gave was for heavily soiled carpet for normal carpet use of that 1/2 that.

If you bought one of those 8lb tubs of Slop and Gobble it likely came with a tiny scoop in it. One of those little scoops is 1/2 of a tablespoon.
 

Goomer

Member
Joined
Feb 9, 2009
Messages
3,398
Location
Bronx, New York
Name
Frank Mendo
Jamesh921 said:
Jeremy,
How many ozs do you recommend to mix in a HydroForce if the HF is metered at;

1:4

and

1:9

Thanks.

Great question!! shiteatinggrin shiteatinggrin
 
Joined
Oct 7, 2006
Messages
1,035
Location
Hastings, NE
Name
Eric Valentine
the 2 lb jar I have came with a 1/2 oz scoop (1 Tablespoon) that had a long handle on it (the whole scoop was about 4 inches long). If that is the same scoop, then the instructions Bob gave are wrong.

1:4 hydroforce
5 quart:
3 ounces (6 tablespoons) for light soiling
6 ounces (12 tablespoons) for heavy soiling

7 quart:
4.5 ounces (9 tablespoons) for light soiling
9 ounces (18 tablespoons) for heavy soiling

9:1 hydroforce double what you use in the 4:1
 

Bob Foster

Member
Joined
Oct 8, 2006
Messages
8,870
if you fill a 5 Quart hydroforce with liquid and it is a 4:1 draw then if you spray out the entire contents of the hydroforce you have put out around 25 quarts (roughly 6 gallons) of liquid. So if the suggested RTU dilution is 1 table spoon per gallon then you need to put out around 6 tablespoons to do that for heavy soiling.

1 tablespoon is equal to 2 of those scoops that come with the Slop and Gobble

The suggested dilution for light soiling is 1/2 a tablespoon (1 scoop) pre RTU gallon

The suggested dilution for heavier soiling is 1 a tablespoon (2 scoops) pre RTU gallon


If you don't trust your hydroforce bucket test it.
 

Latest posts

Back
Top Bottom