solution hose

[Mikey P]

No my wands don't have them i gotta weld them on....so there fore i gotta find some hopefully stainless....

Post the picture of what's going on

How are the Jets mounted to the wand if you don't have the pods?

 

[hogjowl]

Find out why the fossil even HAS a wand while you’re at it.

 

[BIG WOOD]

Post the picture of what's going on

How are the Jets mounted to the wand if you don't have the pods?

I think one of those DANG wands had a model where the jets screwed directly into the wand's head. Interesting idea, but.

 

[bob vawter]

Find out why the fossil even HAS a wand while you’re at it.

I have THREE wands you moron!!! And a dual lamb powered portable that most likely out suck whatever you got and im makin them JUS LIK NEW...its jus what i do......

 

[they live]

I have THREE wands you moron!!! And a dual lamb powered portable that most likely out suck whatever you got and im makin them JUS LIK NEW...its jus what i do......

You should've started with you and Joan.

 

[Cleanworks]

Post the picture of what's going on

How are the Jets mounted to the wand if you don't have the pods?

Probably like these ones. T-jet screws on top.

 

[hogjowl]

I ashamed of you people

 

[Cleanworks]

I ashamed of you people

Pretend you don't know us.

 

[hogjowl]

You’re 25% gone

 

[Cleanworks]

You’re 25% gone

Better than being 25% senile.

 

[Luky]

why get (striaght down) extenders when you can install these?

Extender Benders for standard Two Jet Wands (AW29 & 802) - GreenGlides - The Original Carpet Cleaning Glide

Our GreenGlides exclusive Extend Benders provide a sheer angle to the spray pattern on “AW-29”, all 30 of it’s knock offs, the PMF 802 and the Westpak 762 (WP12-2N) By adjusting the spray to hit right behind the Glide you will get better flushing action and better dry times! (much better in both...

greenglides.com

I'm okay with a straight-down extender( 1/2" 3/4 would suffice), and I like V-jets.

 

[Mikey P]

I'm okay with a straight-down extender( 1/2" 3/4 would suffice), and I like V-jets.

Why do you want your vee jets lower to the floor?

 

[Mikey P]

I'm okay with a straight-down extender( 1/2" 3/4 would suffice), and I like V-jets.

https://greenglides.com/product/jet-extenders-check-valves/

 

[Mikey P]

You’re 25% gone

Try adjusting your Dev manifolds so they spray straight down and report back

 

[hogjowl]

Why? It’s not an issue either way.

 

[Mikey P]

Why? It’s not an issue either way.

Than by all means turn them straight down for a month, please.

 

[Mikey P]

Conceptual visualization isn't your strong point Marty.

 

[hogjowl]

Blindly believing everything you say isn’t either

 

[Mikey P]

I didn't tell the designers of nearly every wand ever made to put the Jets at an angle.


Be obstinate just for the sake of it, you have mastered.


How has that helped you?

 

[Mikey P]

Do this.

Turn Brady's jets straight down with our telling him.

See how long it takes him to notice.

You can do the redos.
Feel free to curse my name as you find the truth in my words.