The best 2.5" hose. Where can I get it?
- Thread starter BIG WOOD
- Start date
hogjowl
Idiot™
Unless folks are complaining about your drying times, don't do it.
Why?
Desk Jockey
Member
He is afraid you're turning into a cleaning nerd...like him. 
@Mark Saiger , where do you get that pretty 2.5hose ?
hogjowl
Idiot™
Because the ONLY reason to wrestle with that anaconda is if it offers REAL utility.
Just one 50' hose can't be that bad of a problem on setup. It's not like I'm going to be wrestling the hose. Besides, I'm considering using it only on jobs where I need 150' and over only.
Mikey P
Administrator
It's totally worth it
Call Greenie, he has all that you need.
Call Greenie, he has all that you need.
Mark Saiger
Mr Happy!
It's Amflex hose....I got it from Joe B.
Don't spend extra to get fancy stuff. It's only 50 foot off the truck, doesn't need to be super flex or anything special.
Always try Larry first for everything. You would be surprised how much you'll save.
I use 2.5 every day, All but the last 50 ft. I got it from Greenie years ago. I dont even notice it anymore. Its all in what you get used to.
Larry Cobb
Member
Thanks, Jerry . . .
I just got several used blue 2.5" vac hose on a TM trade-in ($79 ea.).
We can also offer new 2.5" red SuperFlex.
http://www.cobbcarpet.com/zen/index...cription=1&keyword=FLX255+or+DRB4HB+or+RW25SE
I just got several used blue 2.5" vac hose on a TM trade-in ($79 ea.).
We can also offer new 2.5" red SuperFlex.
http://www.cobbcarpet.com/zen/index...cription=1&keyword=FLX255+or+DRB4HB+or+RW25SE
Nate The Great
Member
Nate The Great
Member
Does a bear shit in the woods, lakes and streams?!?
Think about that next time your drinking mountain spring water.....
Ron K
Member
- Joined
- Jan 3, 2009
- Messages
- 2,371
So they finally legalized grass on grass skirt Island?!Does a bear shit in the woods, lakes and streams?!?
Think about that next time your drinking mountain spring water.....
Cleanworks
Moderator
They've been smoking skirts for years there.
Russ T.
Supportive Member
I'm going to 2.5" too. I've had 100' of it sitting in the shop for a year now.
Devastator Tom allowed me to swap the 2" setup I won in Nashville for a 2.5" version. It came in this week.
What's the best way to get 2, 2.0" ports from the top of my Cleanco waste tank to 1, 2.5" port on the Devastator?
Devastator Tom allowed me to swap the 2" setup I won in Nashville for a 2.5" version. It came in this week.
What's the best way to get 2, 2.0" ports from the top of my Cleanco waste tank to 1, 2.5" port on the Devastator?
Why wait for customers to complain about your work, before you push forward to become a better cleaner?
Todd Millar
Member
what is the website for greenies ?
Ron K
Member
- Joined
- Jan 3, 2009
- Messages
- 2,371
Thats what I asked!
www.greenies.com but thats for Feline Cat Treats. The "Hairball Control" are real popular with "MB"ers!
Desk Jockey
Member
He was fookin with you. That wasn't right man!
Steve Lawrence
Member
Mikey P
Administrator
Same here.
Its the only way to suck.
Its the only way to suck.
Mikey P
Administrator
Bristor probably has all the fittings.
Tell him I sent you
and to fvck off...
Tell him I sent you
and to fvck off...
Doug Rice
Supportive Member
- Joined
- Feb 28, 2011
- Messages
- 425
Joe B endover. Ask me how I know.
Larry, will that plastic hose barb screw right into the lid on my Hydramaster's tank, or do I need something on the underside to screw in to the threads on the barb to secure it?
I'm going to 2.5" too. I've had 100' of it sitting in the shop for a year now.
Devastator Tom allowed me to swap the 2" setup I won in Nashville for a 2.5" version. It came in this week.
What's the best way to get 2, 2.0" ports from the top of my Cleanco waste tank to 1, 2.5" port on the Devastator?
I run 2, 2 inch into into a y that has 2.5 coming out the end. Got it from Greenie as well.
What attaches to your tm?
Larry Cobb
Member
The pipe thread is 2.5" NPT (national pipe thread) on the barb and the elbow.
Most threaded connections on recovery tanks are 2" NPT.
If you cut a hole, then we have a metal 2.5" Nut that will attach it.
http://www.cobbcarpet.com/zen/index.php?main_page=product_info&cPath=68&products_id=4224
Last edited:
I know what the size is. But what I don't know is will it come with something to secure it to the lid? My 2"elbows that are attached have a flange or something like that, that screws on the underside, holding it to the lid. Do you have something similar to send with your barb?
