The best 47 blower or higher slide in

[steve_64]

I don't care for the stainless 210 waste tank neither. It flexes and has cracked and it soesnt drain as well as the aluminum tank in the WM.

Yes too many QD to make replacing parts easier for dummies.

 

[FB7777]

I don't care for the stainless 210 waste tank neither. It flexes and has cracked and it soesnt drain as well as the aluminum tank in the WM.

Yes too many QD to make replacing parts easier for dummies.

Just keep throwing new crap at the wall without addressing the reality


Where are the vacuum air leaks?

I can fix it for you remotely in 2 minutes

 

[steve_64]

Just keep throwing new crap at the wall without addressing the reality


Where are the vacuum air leaks?

I can fix it for you remotely in 2 minutes

Not vacuum leaks. Solution fittings keep sucking air. I fixed my waste tank with duck tape lol.
I found a drip the other day coming from the unloader. I've replaced so many parts under the hood and I think the unloader once already.
Just a pain and expensive.

 

[FB7777]

now I get you Steve

It’s a tragedy to have to replace fittings and parts on a 20 year old machine

 

[Mikey P]

I don't care for the stainless 210 waste tank neither. It flexes and has cracked and it soesnt drain as well as the aluminum tank in the WM.

Yes too many QD to make replacing parts easier for dummies.

How many miles, years and hours did Hagopian chimps torture that thing with before you bought it?

 

[steve_64]

It's just chasing the leaks gets old.
The WM was an 02 with more miles and hours. I replaced 5 or lines and that was it. Thing ran smooth and flawlessly.