The best 47 blower or higher slide in

steve_64

Member
Joined
Aug 11, 2012
Messages
13,371
I don't care for the stainless 210 waste tank neither. It flexes and has cracked and it soesnt drain as well as the aluminum tank in the WM.

Yes too many QD to make replacing parts easier for dummies.
 
F

FB7777

Guest
I don't care for the stainless 210 waste tank neither. It flexes and has cracked and it soesnt drain as well as the aluminum tank in the WM.

Yes too many QD to make replacing parts easier for dummies.
Just keep throwing new crap at the wall without addressing the reality


Where are the vacuum air leaks?

I can fix it for you remotely in 2 minutes
 

steve_64

Member
Joined
Aug 11, 2012
Messages
13,371
Just keep throwing new crap at the wall without addressing the reality


Where are the vacuum air leaks?

I can fix it for you remotely in 2 minutes
Not vacuum leaks. Solution fittings keep sucking air. I fixed my waste tank with duck tape lol.
I found a drip the other day coming from the unloader. I've replaced so many parts under the hood and I think the unloader once already.
Just a pain and expensive.
 
F

FB7777

Guest
now I get you Steve

It’s a tragedy to have to replace fittings and parts on a 20 year old machine
 

steve_64

Member
Joined
Aug 11, 2012
Messages
13,371
It's just chasing the leaks gets old.
The WM was an 02 with more miles and hours. I replaced 5 or lines and that was it. Thing ran smooth and flawlessly.
 

Latest posts

Back
Top Bottom