Thats true you can see thru the opaque tank if the sun and lighting is just right and you squint your eyes but show me a van that doesn't have equipment up against the that tank where the tank is still visible.
Sorry Chris. Currently we have it set up for the GM gas engines only. Not Diesel yet.No more info on the Isuzu? I see everybody else's questions getting answered? This isn't still about Yorkie is it?
-less than 12 months from a major truckmount purchase Chris
That
Sorry Chris. Currently we have it set up for the GM gas engines only. Not Diesel yet.
Steve, yes the heat exchanger is also the silencer so no need for an additional silencer. This works extremly well as the unit is very quiet and minimum back pressure on the blower. In terms of Maximum RPM of the Blower, Gardner Denver specs the Blower at a max of 4000 RPM's. The 2105 Pro 1200 RPM is turning at 85% of max.
Hope this answers your questions.
Shane, no it does not dump hot water. Simply introduces cool water into the solution stream. The temperature is easily adusted with a solution valve. Simplicity was the goal so no electronic valves or devices.
So 3400rpm at max setting?Steve, yes the heat exchanger is also the silencer so no need for an additional silencer. This works extremly well as the unit is very quiet and minimum back pressure on the blower. In terms of Maximum RPM of the Blower, Gardner Denver specs the Blower at a max of 4000 RPM's. The 2105 Pro 1200 RPM is turning at 85% of max.
Hope this answers your questions.
The clutch we use is rated at 120 ft lbs of torque.
The 2105 Pro 1200 RPM is turning at 85% of max
In terms of Maximum RPM of the Blower, Gardner Denver specs the Blower at a max of 4000 RPM's. The 2105 Pro 1200 RPM is turning at 85% of max.
The blower heat exchanger is the silencer?
What is the maximum rpm of the blower?