Zipper - Water Usage?

[steamron]

Comparing the Zipper Wand and the Zipper Spinner,
How much more water does the spinner use to the regular zipper?

The psi jump up when using the spinner, so I was wondering if anyone compared
the difference (not guessing).

Thanks

 

[hogjowl]

"Not guessing"

Pretty much narrows it down to just Saiger

 

[PrimaDonna]

I was going to suggest that Mark would be the one person that likely has the answer to this.....Great Minds, Marty, or should I say Smarty!

 

[hogjowl]

Surely he can't make a video on this!

 

[Lee Stockwell]

Yes he can.

Put each over a container and pull the trigger for a minute.

 

[Mikey P]

a five gallon bucket works best.

test your normal wand too...



the SS uses a LOT of water at 1000 psi

 

[hogjowl]

Don't encourage him!

 

[Erik]

The SS is a 4 flow and puts out 1.5 Gpm. at 1,ooo Psi. It's equivalent to a 8 flow at 500 Psi.

 

[Jack Zipper Zerkie]

Erik used the ss on a really trashed unit yesterday and I changed the jets 80=02 and worked great also tried a new pre treat and wow great results. Also no power to the house so the ss worked great. Thanks Erik for your zipper makes a old guy really enjoy working . jz.

 

[Mikey P]

@Joey H should know

 

[Joey H]

In my experience i have found that i get much better dry times with my S.S. Models than i do with my standard zippers. I have a standard 15 inch setup at 12 flow and 2 Zipper S.S. models that are set at 4 flow and 6 flow. Im using less water when running the S.S.

 

[Mark Saiger]

The Zipper SS Super Spinner because you can clean faster a lot of times due to its agitation from the jets, I really think I take less water PER SQUARE FOOT than a lot of other tools.

Even the 12 flow Zipper Wand can haul the mail and take less per Sq foot.