Ken Snow
RIP
If my math is right again a single block can be as little as 1/5 the cost of a single sticky so again I don't get it plus I can't think of a place I would use a long stickies in place of a couple/4 blocks esp at many times the cost.
The rotary is the hardest thing for me to figure out which one best fits my needs. I almost pulled the trigger on a Hoss until the Mytee rotary came out. So gonna hold off til I get feed back.
Yep- 5x the cost and with 2 man crews not needed imho.
The rotary is the hardest thing for me to figure out which one best fits my needs. I almost pulled the trigger on a Hoss until the Mytee rotary came out. So gonna hold off til I get feed back.
When it comes to different tools, there isn't ever going to be a best one. The best one for me may not be best for you. The more choices on the market, the more likely you will find one that you like. Just keep watching the new stuff in the industry and try it out for yourself.
Ask the veterans and they will tell you.
The best rotary machine is a well designed highflow wand
There. You got it.
And it ain't dejour. It's a classic.
coming from a scrawny 80 year old foreiGner, that advice needs to be taken with a bucket of salt.
I think it really dosent matter for alot of guys who have a RX20 or say a Drimaster, I got my rx20 for $1500 used I paid $2800 for a drimaster
I would hope a machine would speed You up clean better and less fatigue. I havent seen that so much.Tthe rx is a cleaning beast drimaster not so
much both cause more fatigue then a wand IMO, and take's longer. So a Hoss is safe spinning next to tile and wood no dangers at all Jim????
My glided wand it pretty safe! Dropping more cash on anything that does what I already own is stupid! It better A. Speed me up B. Cause less fatigue.
I think a rotovac 360i would be easier to use because it weighs the least,
are you going to find the same things that I have...?? .. doubt it....you are going to set things up different then I do...your going to run it different then I do....so you really need to find some and see if you can use them for a bit to see if they will work for your set up.....
..............
Which is about the same as i wrote in my review of the T rex. I pointed out some of the ''flaws'' for ME in the other units in the market ( not just one but all the units)
For example my rotovac has been walded ,gears replaced, heads broke..and...i aint gonna carry a rx up to a 3rd floor apt
But FOR ME the trex feels like a very good fit. its well built,cleans great, great dry times. I work hard for my money and i dont like wasting it on tools and equipment that dont work or last
but when i do, i learn my lesson and move on
Yep- 5x the cost and with 2 man crews not needed imho.
Mark i don't understand how they would replace a block.
Sent from my DROID RAZR using Tapatalk 2