Next Gen RX20 What are your thoughts?
- Thread starter Andy
- Start date
jmo
Supportive Member
- Joined
- Apr 11, 2011
- Messages
- 350
- Name
- Jeremy
Is that chem drys model.
Andy
Member
- Joined
- Feb 5, 2016
- Messages
- 967
- Name
- Doesn't Matter
That is what I thought when I firsts seen it. Nothing radically new about it. Still no speed dial. Spins too fast for 3 jets. They get too concerned about dry times and not enough thought about cleaning.
F
FB7777
Guest
Single hand use is the most noticeable improvement
It's silly that you need both hands to operate power and spray
It's silly that you need both hands to operate power and spray
Andy
Member
- Joined
- Feb 5, 2016
- Messages
- 967
- Name
- Doesn't Matter
I have the old one, and a rotovac 360i. The RV is light but the jets are too close to the carpet and causes streaking. The RX20 is heavy, jets are farther away so less chance of streaking and it doesn't have a speed dial to slow it up when you need to.
dealtimeman
Everyday is Saturday.
- Joined
- Sep 20, 2008
- Messages
- 10,878
- Name
- Michael
Cleanworks
Moderator
- Joined
- Oct 22, 2012
- Messages
- 28,104
- Name
- Ron Marriott
The brush head on the 360 seems to prevent streaking. Hadn't had a problem so far. I've had rx20's in the past. Always seemed to leave the carpet too wet. Maybe needed a bigger blower or smaller jets. The advantage of the Rx was the spring loaded shoes. Great on uneven glue down. The new one looks good but I don't see much advantage over the 360 xl with brush head.
J Scott W
Member
- Joined
- Oct 16, 2006
- Messages
- 4,061
- Name
- Jeffrey Scott Warrington
If you like the RX20, the new one has some nice features. On-board corner and edge tool so you may not need to bring out the wand. Lighter weight plus an added handle to help with lifting into and out of the van; sight tube to see dirty water and how dry (or not) the carpet is getting; and at a lower price. Only positives.
F
FB7777
Guest
They are built like tanks, I have one that must be 25 years old that I got for $500
F
FB7777
Guest
Rotovac is the same , except the power and solution triggers are on opposite handles
Just think they should both be accessible on one handle to free up one hand
They could make a left handed one for Marty so he can hold a screwdriver in his right
J Scott W
Member
- Joined
- Oct 16, 2006
- Messages
- 4,061
- Name
- Jeffrey Scott Warrington
Screwdriver? That's not Marty. RC Cola and a BBQ sandwich.
F
FB7777
Guest
I pictured him as a pulled pork kinda guy
Cleanworks
Moderator
- Joined
- Oct 22, 2012
- Messages
- 28,104
- Name
- Ron Marriott
Pulling something anyway.
Clean Response
Member
- Joined
- Jan 21, 2008
- Messages
- 790
- Name
- Brad Gouveia
I used to love my RX-20 but since i got my zipper I have not used it much. I used to have 4 of them I like them so much.
The issue I had with them was the dam handle. I would take it in to get it service and then a month later it still was falling down and not holding. It happend on all of them I just got sick of it. I still have one but have not used it forever. I still would not trust the handle on that one but it does seem nicer and the few change on it seem nice but I still think I would look at other rotary before I bought a RX.
The issue I had with them was the dam handle. I would take it in to get it service and then a month later it still was falling down and not holding. It happend on all of them I just got sick of it. I still have one but have not used it forever. I still would not trust the handle on that one but it does seem nicer and the few change on it seem nice but I still think I would look at other rotary before I bought a RX.
F
FB7777
Guest
Do you have any super spinners or straight bar zippers?
Clean Response
Member
- Joined
- Jan 21, 2008
- Messages
- 790
- Name
- Brad Gouveia
I just got regular zippers, I use it on commercial and residential. just bump the pressure up on the commercial jobs and it works great.
GreenTechAgain
Member
- Joined
- Jul 15, 2011
- Messages
- 470
- Name
- Ross Martin
Just watching the video makes my back hurt.
Shane T
Member
- Joined
- Nov 7, 2006
- Messages
- 1,663
- Name
- Shane Tiegs
You could tell the guy demonstrating did not clean for living. The handle was adjusted to low.
One hand operation and perhaps the positive lock handle are the only real improvements.
Needs better air flow for better water recovery.
Lee Stockwell
FOJL
- Joined
- Oct 7, 2006
- Messages
- 18,851
- Name
- Lee Stockwell
Does the adjustable handle anchor to a gear like the the bulletproof Advance buffer used?
I like the upgrades.
I like the upgrades.
SamIam
Member
- Joined
- Aug 9, 2012
- Messages
- 11,450
- Name
- sam miller
I thought streaks on the 360i was running to high of water pressure?
SamIam
Member
- Joined
- Aug 9, 2012
- Messages
- 11,450
- Name
- sam miller
Bob Haskins
Member
- Joined
- Jun 7, 2018
- Messages
- 10
- Name
- Bob Haskins
the RX20 was originally invented by the guy who did the 360i and 360xl which are both lighter / better IMO
Nomad74
Boy Sprout
- Joined
- Feb 4, 2016
- Messages
- 24,126
Man. You rotovac guys.
F
FB19087
Guest
I got rid of him....
Lee Stockwell
FOJL
- Joined
- Oct 7, 2006
- Messages
- 18,851
- Name
- Lee Stockwell
I smelled that.
Why the need for a fake to promote a moderately good tool, especially in a thread about a competing tool?
Why the need for a fake to promote a moderately good tool, especially in a thread about a competing tool?
J
JS41035
Guest
Reminds me of that goofball in Nashville
Mikey P
Administrator
- Joined
- Oct 6, 2006
- Messages
- 116,883
The new RX will be at MFMN ifn your itchin to try one
