The disco truck killer has arrived. (PICS)

[Mike Draper]

the deal with CNG gas is the price. $1.25 a gallon in Utah. however, if we dont get the grant for CNG conversion, we will run propane and I have an agreement with the local propane store for $2.00 a gallon propane. the little giant is a #4

Is more than a gallon of CNG or propane required to do the same work as a gallon of gasoline?

with my propane setup I should run a total of 1.7 gallons per hour of propane. This is under heavy usage.

 

[Brian R]

Wow....I do like it mo bettah than that other thing.

 

[ascrubabove]

WOW!!!!!

 

[daniel@procarpet]

Mike do you plan on dual wanding any?

 

[Mike Draper]

no, I'm single wander.

 

[steve g]

sorry I didn't say it but that is a great looking rig,

I have heard when you run propane you are down on power about 30%, with us being already higher altitude that could mean even less power but I am no expert.

the npr's with the exception of the diesel model has always been a GM powertrain, and that was one of the big problem areas. the motors were done at 100k and the trannies blew every 30k. we had 5 npr's 4 gas one diesel these were replaced about every 4-5 years during my time there I bet I drove 8 different npr's, the gas models got 7 mpg on a good day and the diesel got 16mpg most of the time. the one diesel we had was the most reliable and it didn't have trans problems either, good luck and don't get stuck in the snow because only one set of dual rear wheels will spin and unless you are extremely careful you will blow the spider gears out of the rear end, I personally grenaded 3 rear ends getting stuck up in park city in the winter, 2 grand a pop. I even had one catch fire while driving it, we put out the fire with a pump sprayer and microban.

 

[Zee]

Awesome truck- beautiful setup!

I dont know who Bethel is.

I'm still trying to figure it out.. were you joking about not knowing the Bethels?

I mean they only make the best looking setups in the world- for our industry...

Great job Mike!!

Bet it is great to work out of 8)

Its classy that he didn't say anything about you not knowing who he was. somewhat amus

 

[alazo1]

Looks great. First time I've seen those fan cages.

Only question is how do you guys with carpet in the floor manage to keep it clean?. I have to scrub and hose down the stock rubber floor in the van just about every week.

Albert

 

[Studebaker]

Good idea on the fan holders. I find that if I stack them wheels up they don't move around much.
Nice layout

 

[Erik]

Great looking setup Mike!

Anyone want to buy a couple of Vortex Trucks?

 

[tmdry]

That setup is so nice and purty.

 

[Mikey P]

Do you want to trade? Ivebeensold

Very nice!

A question that has been on my mind about the Judson though. How do you rinse the waste tank out. Seems like it would be almost impossible when viewing the pictures.

Ports on both ends Loren.

 

[Mike Draper]

Good idea on the fan holders. I find that if I stack them wheels up they don't move around much.
Nice layout

Why dont you send me a couple more studebakers so the fan holder is complete?

 

[mirf]

Looks great, hands should heal with only minor scarring!
If you are not planning on useing area above door, why not a full door? :?:

 

[Mike Draper]

I couldn't find a full door with all the coorect brackets and runners.

 

[Brian R]

Looks great. First time I've seen those fan cages.

Only question is how do you guys with carpet in the floor manage to keep it clean?. I have to scrub and hose down the stock rubber floor in the van just about every week.

Albert

You know what he does for a living right? :mrgreen:

 

[AshleyMckendree]

This has to be the MOST, FUNCTIONAL, well equiped setup I have EVER seen!

Great Job!

 

[bensurdi]

Nice job! Where did you get the water tank? My water tanks are 500 gallon and take up to much room so I was thinking of switching them out for something like that.

 

[John Olson]

Ben you get them at the farm supply store. Good Job Mike. Very nice

 

[prestige cleaner]

that thing was awesome !!!!!! also, you have all top end equipment( fans, vacuum, and assessories).

 

[glenboy]

wow that is giving me wood.lol,very nice.love the fab work on the fan holders.the whole package

 

[TimP]

I have to agree with everyone, it's very nice looking.

But I'd like to hear more about the heat exchanger.

 

[steve g]

John Olson" data-source="" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

Ben you get them at the farm supply store. Good Job Mike. Very nice

aka steve regan

 

[Mike Draper]

National Tank Outlet http://www.ntotank.com/ind.html

The HX is a little giant#4 propane heat exchanger. All the heat you could possibly want. It was 0 deg. when we started this morning and I was getting 220 at the wand on my 12 flow TI wand.

 

[tmdry]

Can you post a video of the setup. :mrgreen:

 

[randy]

Great looking rig, Mike.

Now go soak your hands in peroxide or betadine for 3 minutes and get some neosporin on those wounds.
You don't need a blood infection, happens all the time from minor wounds and can kill you.
Be safe.

 

[Loren Egland]

[quote="Loren Egland":2h5h3210]Do you want to trade? Ivebeensold

Very nice!

A question that has been on my mind about the Judson though. How do you rinse the waste tank out. Seems like it would be almost impossible when viewing the pictures.

Ports on both ends Loren.[/quote:2h5h3210]
I can see the port in the picture. It just looks very difficult to give a thorough rinsing. I am so used to the Powermatic. The whole top lifts off for great access. It drains dry also instead of leaving a couple inches in the bottom.

I take it you don't have any problem with flushing out the waste tank. I guess I will just have to take a closer look next time I get near a C-4.

 

[adamh]

I was feeling good about my set up until I saw that. WOW what a truck! My fav so far.

 

[Art Kelley]

[quote="Mikey P":217621xc][quote="Loren Egland":217621xc]Do you want to trade? Ivebeensold

Very nice!

A question that has been on my mind about the Judson though. How do you rinse the waste tank out. Seems like it would be almost impossible when viewing the pictures.

Ports on both ends Loren.[/quote:217621xc]
I can see the port in the picture. It just looks very difficult to give a thorough rinsing. I am so used to the Powermatic. The whole top lifts off for great access. It drains dry also instead of leaving a couple inches in the bottom.

I take it you don't have any problem with flushing out the waste tank. I guess I will just have to take a closer look next time I get near a C-4.[/quote:217621xc]

I don't think I've ever rinsed the waste tank on the three TMs I've owned over 24 years including the '87 WM I still have. They're like a bath tub. You pull the dump valve and they empty. What am I missing?

 

[Brian R]

Have you ever seen a bathtub that wasn't cleaned for 24 years? :shock: shiteatinggrin