Jamesh921
Member
I'll try to make that happen tomorrow. What exactly do you want to see?
We should get Fred to revamp the site so we can down load videos directly. That'll make Marty happyI think you have to upload it to YouTube or whatever other sites do it.. Then copy and paste here.
CLEAN AS A WHISTLE as is the lint filter. I talked to a mechanic @ PCS today and he said that (if the filters weren't kept clean in the past) the heat exchanger may be blocked by lint/debris. I'm going to pull and check them tomorrow.Is that flat rectangle filter in the tank clean?
I don't know how to post to YouTube yet. I work all the time and have no time to learn techy stuff. However, if you want to send me an email or cell # in a private msg, I can send you the video.I think you have to upload it to YouTube or whatever other sites do it.. Then copy and paste here.
Sent..CLEAN AS A WHISTLE as is the lint filter. I talked to a mechanic @ PCS today and he said that (if the filters weren't kept clean in the past) the heat exchanger may be blocked by lint/debris. I'm going to pull and check them tomorrow.
I don't know how to post to YouTube yet. I work all the time and have no time to learn techy stuff. However, if you want to send me an email or cell # in a private msg, I can send you the video.
Yessir, and it is clean as a whistle. I'll send you that video now.Blower filter is under the lid in the back of the tank..
You can buy a vac gauge at Acklands/Grainger or other supply. I drilled a hole in some aluminum plate and put a gasket around it. Cheaper than buying a premade testerOne with the rubber 1/2 ball thing shows lift.
I don't know how to do that. But, I think I got it sent from my iPhone in 2 different videos by breaking it in half. I hope.Upload it to google drive and share the link to it. Keith should be able to access it then.
https://www.google.com/drive/
That's what I'm going to check next. I pulled the heat exchangers today to check for blockage but they were OK.Could be belt slippage to on the blower