The machine is like 110 lbs.
Why? You ain’t gonna buy one! And if you did , all you’d do is put Windex in it and use a red pad.PRICES!
Of course the pad will still make contact with the carpet, but just not with the full head weight.How is it not fully touching the carpet? The machine is like 110 lbs. What is the depth of the washer, and how many tamping per rotation?
Anybody ever use a melamine pad on a TRS machine? That’s where the difference will be obvious. Only the outer portion of the pad will should wear. Less wear toward the center.
I actually enjoyed talking with him. His marketing sucked, but whateverSo when and where did Guerkinks piss on your doughnut?
I’m not griping, I’m saying take out the stupid washer and it cleans better.
Ask me how I know.
It’s under one of the three bolts that come out of the flywheel.I'll give it a try, where is it?
There’s actually a video where the TRS guy takes apart that whole piece and shows you the washer.
While you’re at it, ask Ashley McKendree how he knows.
You wrote that I’m the only person who gripes about the tamping, which you know isn’t true, so I reminded you about a CCP conversation you had with Ashley.Well, since you mentioned Ashley, i believe you.
"Tamping" action bring junk to the surface
all it told me was, CRB's ain't "all that" ...but I already knew that.
If he'd of slowed down on the vac, and did it in the time it took to CRB and vac..and emptied the Sharka couple times, he'd of got just as more and more
the pad caught a little debris
but do commend Steve on a "better" VLM clean
Steve, do you post vac after mopping up?
L.T.A.
Nice lip service and your preferred narrative has been around a long time.
Nice lip service and your preferred narrative has been around a long time.
I’ve used all of them and owned a Spyder for a year.
The Orbot will out clean a Trinity, albeit, a bit slower.
The Mytee is as fast as a Trinity but cleans a bit deeper, as the driver is not moving so fast that the pad sort of skims over the carpet.
Every OP I’ve used needed cleaned up after cleaning because the oscillation digs into pile and pulls up debris.
Nothing to do with a washer under a bolt.
You don’t want to go down that road... trust me. There are two sides to every story and I’m happy to voice my side, but it’s has nothing to do with removing a washer to make the machine clean better.
You must realize people see right through you, right?I wouldn't trust a Mytee page moderator with a sack of turds...
#washerluv